Search found 7 matches
- Sun Oct 17, 2010 7:57 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: 1954 241 Dodge Hemi Hardened Valve Seats
- Replies: 1
- Views: 5702
1954 241 Dodge Hemi Hardened Valve Seats
Just need confirmation on the 54 241 Dodge Hemi Heads I have been told the heads have hardened valve seats for unleaded gas, I have S/steel valves from Egge so what's the story ? do I need to used a valve saver additive in the unleaded fuel ?
- Thu Oct 07, 2010 7:11 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: 241 Dodge Hemi 1954 block & heads
- Replies: 4
- Views: 8512
Re: 241 Dodge Hemi 1954 block & heads
Thanks for the info Bob, I have installed the adjustable push rods & setting the lifter preload, started off at zero lash & then going one full turn on the adjuster, seems chattery on cold start up so I am going to redo the adjustment to 1 1/2 turns and monitor things from there, also noted ...
- Thu Jun 03, 2010 12:15 am
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: 241 Dodge Hemi 1954 block & heads
- Replies: 4
- Views: 8512
241 Dodge Hemi 1954 block & heads
I have a question regarding the 241 Dodge push rods HOTHEADS part number #21087S1/4 push rod with 3/8" tube diameter size I have purchased, I am using standard lifters & rocker arms........ the original push rods are 5/16” with 1/4" ends to suit the standard lifter & rocker arms an...
- Wed Nov 21, 2007 9:41 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: Spark Plug Tubes
- Replies: 6
- Views: 10691
- Wed Nov 21, 2007 4:59 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: Spark Plug Tubes
- Replies: 6
- Views: 10691
- Tue Nov 20, 2007 5:14 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: Spark Plug Tubes
- Replies: 6
- Views: 10691
241 dodge hemi spark plugs
did you say take the washer off the spark plug?
- Tue Nov 20, 2007 5:12 pm
- Forum: (LEGACY) Early Dodge / DeSoto HEMIs
- Topic: Valve Cover Studs/Bolts..241 Hemi
- Replies: 3
- Views: 8197
241 dodge hemi
Yes it's the top ones, does any one make some nice long studs suitable for the Obrien Trucker covers?