TheHEMI.com

Got a set of 392 rods, 1673758x any special meaning for the "X" on the end???

Thanks

Where do you find the snap on type ends for the 7mm wires. I have a nice set from NAPA, but they won't snap on the plug with the little clip on it. If I take it off, then it goes on the spark plug(Very loosely) end but doesn't snap on. I'm running no covers but have the 426 boots. My buddie said jus...

Where can you buy Head gaskets for a .060 over 291?? I had to take a head off and repair the lifter bores on the drivers side and it tore it all up...I don't want to buy a whole kit just for head gaskets....

Spoons

Hey guys, I think I might have a couple of problems that have reared their ugly head. As I started assembly, I checked the ring gap and found it to be about .021. Also, skirt clearance is about .007 (.0035 per side). I quick checked the bore (motor bored .060 over) and found it to be 3.785 (Quick ch...

Bought the custom adjustable pushrods from Smith Brothers...I see they are all( lifters) .904 Dia. I guess it depends on where the oiling hole is in the lifters.
I have the stock springs, keepers and retainers. I can use the retainers, keepers with the new springs???

I just got my re-ground cam back from Clay Smith. Is it true you can use a 60's OEM lifter from a 318 as well as the valve springs and retainers??

Spoons