Search found 9 matches

by 1956twin331s
Mon Dec 11, 2017 7:44 am
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Hey George ,where are you on your boat?
Mine is running well now,haven’t moved it,next move is slowly,500 feet down the canal, to ramp and pull out and check.
by 1956twin331s
Thu Oct 19, 2017 9:05 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

THE BOOK,,, The Chrysler manual I will take a picture of it and post. Its the blue and yellow manual with the engine pictured on the front. I have had that book since day one its 61 years old like the boat. OH AND THE BOOK IS CORRECT (I AM DUMB). Both dists turn clock wise. ( I AM DUMB TO SAY THE BO...
by 1956twin331s
Tue Oct 17, 2017 9:27 pm
Forum: Politics
Topic: Florida professor tweets Texas deserved Harvey for supporting Trump
Replies: 2
Views: 922

Re: Florida professor tweets Texas deserved Harvey for supporting Trump

Liberals as such should all be beat the crap out of till they se reason and want America Great again.
Stand for the flag , kneel to,pray OR YOU ARE A TRAITOR.
by 1956twin331s
Tue Oct 17, 2017 9:15 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Well port turns left stab turns right so distributors also must turn counter, yet in the book they show same rotation! The book HAS TO BE WRONG. I will go tomorrow and check for sure. I got the running well , well enough for the little bit it moves. Points and carb are so simple since I have been at...
by 1956twin331s
Sun Oct 15, 2017 9:34 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

And what is B or RB mean in the reference of distributors??
by 1956twin331s
Sun Oct 15, 2017 9:32 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

2x1 needs kits,really they need accelerator cups or pistons, WHERE. .? Do I find kits?
by 1956twin331s
Sat Oct 14, 2017 8:13 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Thanks George,yes they are counter rotating,facing transome ,port is left hand stab right hand. So I can make a shaft for the distributors ,I have a machine shop. So I need the ignition module from a Chrysler car ,are they all the same? Would it be an ignition system from the 70's cars I assume? Tha...
by 1956twin331s
Sat Oct 14, 2017 8:52 am
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 12896

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Here is a 1956 copy of a Chris Craft Constellation,it has twin331 M45s engines,been in the water for 61 years! I wish for someone to give me some contacts for carburetor and ignition upgrades! This is in StMartin Parish Louisiana,where the boat lives, it was built in New Orleans Louisiana in 1956, a...