Search found 596 matches

by George
Fri Nov 10, 2017 4:44 pm
Forum: (LEGACY) Early Dodge / DeSoto HEMIs
Topic: New Cams for Chrysler, Dodge and Desoto Hemis
Replies: 3
Views: 2524

Re: New Cams for Chrysler, Dodge and Desoto Hemis

318 are the ones that work, just the right space for the cross bars. Lifter holes are too close together on the Dodge, and too far apart for the Chrs. Sounds like you received a regrind that has too much ground off.
by George
Mon Oct 23, 2017 11:16 am
Forum: General Hemi Discussion
Topic: HemiHaines in Daytona Beach, Florida
Replies: 4
Views: 121

Re: HemiHaines in Daytona Beach, Florida

well, that sucks.
by George
Fri Oct 20, 2017 11:03 am
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

sounds like a great story! IF they make a Pertronix for your dist. you could try that. Or you'll have to lengthen the dist shaft (or the swap shaft if that works) or lengthen the Int shaft. The gears might be cut reverse, but there's a good possibility of 3 timing gears instead of 2 & a chain. 3...
by George
Thu Oct 19, 2017 6:06 am
Forum: General Hemi Discussion
Topic: HemiHaines in Daytona Beach, Florida
Replies: 4
Views: 121

Re: HemiHaines in Daytona Beach, Florida

Looks like you have to EMail
by George
Wed Oct 18, 2017 5:59 am
Forum: General Hemi Discussion
Topic: HemiHaines in Daytona Beach, Florida
Replies: 4
Views: 121

Re: HemiHaines in Daytona Beach, Florida

Probably can contact through their EBay listings
by George
Wed Oct 18, 2017 5:58 am
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Some engines (truck/marine?) have 3 gears instead of the normal timing chain resulting in the dizzy turning the normal direction
by George
Tue Oct 17, 2017 11:57 am
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

RB means Raised Block, the deck height was raised to get a longer stroke, this increased the distance the dizzy shaft has to go to get to the int shaft vs the original B block. Chr made engines in both B & RB blocks. B 350, 361, 383 (except in '59), 400 RB '59 383, 413,426 (Wedge & Hemi), 44...
by George
Sun Oct 15, 2017 12:55 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

You can get the whole ignition system (dizzy, boxes, wiring) off a 73 through some time in the 80s Mopar or get a kit from Mopar performance. If one of the dizzys turns counter clock wise either the B or RB dizzy (don't know which) should bolt in.
What carb set up you have? 4 bl or 2X1?
by George
Sat Oct 14, 2017 4:14 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

Assuming one is counter rotating, does the dizzys in both engines turn clock wise or different directions?
by George
Sat Oct 14, 2017 3:20 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

You can upgrade the ignition by going to an electronic dizzy for the 318/340. either by cutting & extending the dizzy shaft or installing a longer intermediate shaft. reportedly you can install a shat ot of either a B or RB big block in the LA dizzy, one is the right length. Guy never came back ...
by George
Sun Sep 24, 2017 9:18 pm
Forum: Marine / Industrial Hemis
Topic: 1956 Matthews Martinique with twin 331 chrysler marine hemis
Replies: 15
Views: 10175

Re: 1956 Matthews Martinique with twin 331 chrysler marine hemis

hopefully they have a closed cooling system if you are in salt water...
by George
Sun Sep 24, 2017 9:12 pm
Forum: General Hemi Discussion
Topic: Complete Chrysler Hemi Engine Manual
Replies: 1
Views: 237

Re: Complete Chrysler Hemi Engine Manual

it's a decent book. Has some errors in it & conflicting opinions. Go to www.jalopyjournal.com click on the HAMB then put Hemi Tech Index into "search".
by George
Tue Jul 04, 2017 12:14 pm
Forum: (LEGACY) 331-354-392 HEMIs
Topic: Intake Valves
Replies: 1
Views: 450

Re: Intake Valves

hot Heads, Quality Engineered Components
by George
Tue Mar 21, 2017 10:14 am
Forum: Projects and Products
Topic: Aluminum Desoto heads
Replies: 3
Views: 926

Re: Aluminum Desoto heads

Someone was just posting on this on the HH forums.
by George
Sat Sep 17, 2016 5:10 pm
Forum: (LEGACY) 331-354-392 HEMIs
Topic: hemi timing cover
Replies: 2
Views: 2642

Re: hemi timing cover

Why?
by George
Sat Sep 17, 2016 5:08 pm
Forum: (LEGACY) 331-354-392 HEMIs
Topic: What Temp should 392 run at normally?
Replies: 9
Views: 2758

Re: What Temp should 392 run at normally?

This is a Dead Thread from '08 that some guy asked about something totally different to revive it for some reason....
by George
Mon Jul 25, 2016 1:28 pm
Forum: General Hemi Discussion
Topic: Fram Filters
Replies: 4
Views: 2971

Re: Fram Filters

You pay your money & take your chances. I use wix, why risk it over a couple $$$$.
by George
Wed Jul 20, 2016 4:59 pm
Forum: "Nearly Hemi" Polys
Topic: 315 Poly Loses spark
Replies: 1
Views: 2320

Re: 315 Poly Loses spark

Probably something like the condenser heating up. Might check & see if there's a Pertronix for your dizzy.
by George
Fri Jul 01, 2016 7:49 am
Forum: General Hemi Discussion
Topic: Fram Filters
Replies: 4
Views: 2971

Re: Fram Filters

There was a guy going by the name of something like "Dan the oil guy" who had photos of cut open filters, the Fram looked really bad.
by George
Sat Nov 22, 2014 7:58 pm
Forum: (LEGACY) 331-354-392 HEMIs
Topic: 56' 331 Hemi - octane gas?
Replies: 3
Views: 1259

Re: 56' 331 Hemi - octane gas?

Rob wrote:It would run on 79 I bet. lol
Probably. hemis can run a point higher C/R on the same octane as a wedge, so what octane would be needed on a 5.6-6.5 wedge engine?
by George
Thu Nov 20, 2014 10:05 am
Forum: (LEGACY) 331-354-392 HEMIs
Topic: I am still alive
Replies: 13
Views: 1788

Re: I am still alive

Got it. Get my reply?
by George
Sun Nov 16, 2014 10:57 am
Forum: (LEGACY) 331-354-392 HEMIs
Topic: I am still alive
Replies: 13
Views: 1788

Re: I am still alive

found the CC sent back by the site dated Oct 15.
by George
Fri Nov 14, 2014 7:45 pm
Forum: (LEGACY) 331-354-392 HEMIs
Topic: I am still alive
Replies: 13
Views: 1788

Re: I am still alive

174 views and not one word. I guess yall really didn't give a darn if I really was dead. Missed this the 1st time it was posted. Did send a PM recently, did you get it? No George, I sure didn't. I double checked. I have a few in there, but none from you. Wait till yall see what I am doing for a par...

Go to advanced search