TheHEMI.com

Been to a few events this summer with my Dad and had a good time, very excited to have the paint done!

HEMI...

HEMI Scoop Art...

Engine, 354 inches of Chrysler HEMI

...

Hey there, I made a run and the car was running real rough, we then determined it was the secondary float due to all the gas being dumped into the secondaries, we then tapped in the secondary float bowl and it smoothed right out. Anyone ever have this happen? What would cause this and how can I prev...

Well it has been a few days with no reply to my question, I am sure some one can help we would greatly appreciate any insight about using this style harmonic balancer. Thanks again for any help Brian & Gordy

Hey there, In order to use a 340 stock style harmonic balancer with an early HEMI 392-354 or an early Dodge 270 or 315 you need to use an early style 340 that is from an internally balanced motor?, Cause the HEMI is also internally balanced, correct...? And will the key line-up and be the right size...

Hey there, we did buy it picking it up tomorrow, at a bargain price I think. Couldn't pass it by, thanks for the insight, is the early Dodoge HEMI stuff that hard to come by and does anyone have some valve covers? Thanks Brian & Gordy

Just got to take a look at a '59 315 truck motor # M8-D6, this a complete motor out of an old farm truck any insight on it, is it worth the trouble being a Dodge, we did just picked-up a 270 and I know the 315 is the tall block. We are looking to use these old Dodge Hemis in some cool street cruiser...

Well, my Dad and I purchased a 270 Dodge HEMI out of an old farm truck from a guy who lives right down the road from my Dad, it was in the local paper. We are pretty excited to add this new acquisition to our HEMI family with our Pro-street 354 '65 HEMI Valiant and our 392 HEMI project we are workin...

Hey there, I attached a link to my aol photo page with pics of my pro-streeted '56 HEMI '65 Valiant, It was quite a task, as far as the motor mounts we used the original '56 mount minus the impregnated rubber with our own mount platform fabricated to the mounts attached to the original slant-6 k-mem...

HERE IS A LINK TO A PHOTO OF THE REMOTE THERMOSTAT ON MY 1956 354 HEMI


http://www.chicagolandmopar.com/photos/ ... _0923.html



WE MADE IT OURSELVE AND WORKS GREAT, THANKS BRIAN

Hey there, Here is a link to a pic of the 354 HEMI Valiant at the Belvidere Mopar Happening car show. And no I have not raced it yet, sorry. The old Hemi has 80,000 original miles and all we did was clean it up and paint it, she needs a rebuild but for cruising around its been alot of fun. Brian and...

HEY THERE,
I AM LOOKING TO PURCHASE A 392 CENTER SUMP OIL PAN FOR MY '65 VALIANT WITH A '56 354 HEMI. I HAVE ONE ON THERE NOW BUT I WOULD LIKE TO MAKE A BAFFLE FOR ONE, SO IF ANYBODY CAN HELP ME OUT LET ME KNOW.
THANKS BRIAN AND GORDY

HEY THERE,
I WAS JUST CURIOUS IF ANYONE HAD REPLACED THEIR DUAL POINTS WITH A PERTRONIX CONVERSION AND IF SO HOW DID IT WORK? ANY PROBLEMS AT ALL WITH IT? JUST LOOKING FOR SOME FEEDBACK THANKS BRIAN AND GORDY
'65 VALIANT W/ 354 HEMI

Hey there, Brian again, there are some photos my 354 HEMI Valiant on the ChicagoLandMopar.com website from the Mopar Happenning 2005. There is a good picture of the motor and one the car, with no hood yet, but check it out and let us know what you think. I have put about 1000 miles on it since then,...

HEY THERE GUYS, JUST GIVE YOU AN UPDATE ON THE 65 VALIANT/ 354 HEMI PROJECT, WE JUST PULLED THE MOTOR OUT LAST WEEKEND AFTER A COUPLE MONTHS OF STUFFING IT IN THE VALIANT, NOW WE JUST HAVE TO FINISH PAINTING AND FITTING ALL THE SMALL DETAILS. WE DID MAINTAIN THE STOCK INNER FENDER WELLS AND STOCK FR...

WE ARE NOT SURE WHAT TRANS WE ARE GOING TO USE YET, BUT FROM THE RESPONSE HERE LOOKS LIKE NO ONE HAS TACKLED THIS PROJECT. AND HOW CAN I POST PICTURES HERE?

My Dad and I picked up a '56 354 Hemi, and are going to install it in my Pro-Streeted '65 Valiant. The Valiant retains the stock 170 Slant Six/904, but has been upgraded with a '74 Dart front disc brake set-up, sub-frame connecters, heavy duty cross member, six point roll bar, 18.5 inch Mickey Thomp...