Id for me please!!

Help with decoding your Hemi engine.

Moderators: scottm, TrWaters, 392heminut

Post Reply
cudatoo
Posts: 3
Joined: Fri May 07, 2004 12:00 am
Location: Ore.

Id for me please!!

Post by cudatoo »

:D > Hi Gary here. I have two old hemi's and there's a question
> as to what they are, 241 or 270. They both have VT 344 as
> the eng. code which by all I can find say's they are 1954
> 270 truck eng.'s now come's the weird part one is I believe
> stock bore measured with a tape at 3 7/16 bore or so the
> second is bored 60 over and measured 31/2 in bore which
> would tell me that the data I'm reading on the web page's
> are wrong and what I have are 241's another strange thing
> about these is one has a harmonic balancer and bolt on
> pulley and the other is just a pulley riveted to a solid
> steel plate. do you have any insite on these creatures'???
User avatar
centerline
Posts: 89
Joined: Fri Oct 04, 2002 10:48 am
Contact:

Post by centerline »

What are the casting numbers?
Post Reply