STS Turbo Kit Coming

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

STS Turbo Kit Coming

Post by scottm »

Squires Turbo Systems
http://www.ststurbo.com/

Sounds like they have a "pre-release" going out to
some select customers right now. I imagine so the
systems can be tested before release... maybe Nov.
I will post their official press release when available.
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

Watch for it to be released at SEMA.
I will post the PR when it's available.
TangoHemi
Posts: 15
Joined: Sat Jun 26, 2004 9:14 am
Location: Florida

Post by TangoHemi »

WOW!! Impressive. Read all the magazine articles and you get a feeling that remote turbos are the future! I can't wait for the numbers and prices to be posted on our Rams! SRT-10, look out! 8)
'03 Ram 1500 QC "Thunderroad"
H-60 Special Ops / Rescue Pilot

http://dodgetruckworld.tenmagazines.com ... 332&pos=13
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

Enough teasing, here is their official press release...

STS officially announces their HEMI turbocharger kit
http://www.thehemi.com/news.php?id=20041109-1

154 rwhp and 175 rwtq boost with their turbo kit. :o
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

The STS turbo kits are IN STOCK and READY TO SHIP.
The kit makes 417 rwhp and 460 rwtq running at 7 psi.

http://www.ststurbo.com/ram_1500_hemi_/

Check out the above URL for pictures, prices, and such.
Rampant
Posts: 94
Joined: Fri Jun 25, 2004 8:38 pm
Location: Virginia

Post by Rampant »

Those numbers are bs, or they would be letting their people post results. Everyone who has one installed has had to promise not to release dyno numbers. I guess those numbers right be attainable right before your piston turns into a donut.
hemifever
Posts: 99
Joined: Mon Dec 01, 2003 7:04 pm

Post by hemifever »

JMAN on DTW posted 369hp with their 5psi kit. Yes, he was a little lean above 4500rpms but STS is shipping him a little bigger injector to fix that. But still, that was 115hp increase over his base pull. His tq was only about 50 more than his stock pull but he hadn't done any tuning yet. That was an install and dyno. My thoughts are when the a/f drops back from 13:1 to 12:1 that hp will be back around a 90hp increase which is what STS stated the 5psi setting should show. He stated he was having trouble getting full boost on the dyno. On the street everything works great but on the dyno the demand from the rollers wasn't allowing his truck to respond the same. So take that into account for the tq # too.

The folks keeping quiet had prototypes.
1971 Plymouth Cuda - 451 stroker
2003 QC 4x4 Dodge Hemi - STS Turbo, KRC 6005 heads & rods, Ross pistons, 6.1L crank & cam, ARP main/head studs, JBA headers, SMT6, APS converter: 575rwtq/492rwhp @ 9psi
2005 Chrysler 300c
MG42pillbox
Posts: 194
Joined: Mon Jul 14, 2003 7:29 pm
Location: Phoenix AZ

Post by MG42pillbox »

That would equal to about 560hp and 605lbs of torque.... A Definate KILLER TRUCK
One whose life is Infecting others with Falsehood, shall fall greater than any of their Victims.
Post Reply