Hello everyone, I´m overhauling my 2003 5.7 Hemi, in Central America, Need to know the torque on cylinder heads,and others, does anyone have that info. Or need to get a manual just for that, and if so, can some help how to go about finding the manual?
Many Thanks
Daniel Diday
Honduras c.a
CYLINDER HEAD TORQUE
Moderator: scottm
CYLINDER HEAD TORQUE
2003- 5.7 HEMY QUAD CAB
1973- xr7 COUGAR
1993-LS 400 LEXUS
1973- xr7 COUGAR
1993-LS 400 LEXUS
-
- Posts: 143
- Joined: Thu May 18, 2006 11:31 am
- Location: UK
Hemi Torque figures
Hi,
I searched for these figures on the 'net. The best I could get, was at a 'site named, www.hemitruckclub.com. From the home page, go through to their link for the '03 manual, engines, 5.7L, cylinder heads, and then cylinder head installation.
It might be a little slow to load if you're on a low performance system - it's all pdf's. So bare with it !
Please check that these are the right figures !!
Hope you get it all back together !
Mike
I searched for these figures on the 'net. The best I could get, was at a 'site named, www.hemitruckclub.com. From the home page, go through to their link for the '03 manual, engines, 5.7L, cylinder heads, and then cylinder head installation.
It might be a little slow to load if you're on a low performance system - it's all pdf's. So bare with it !
Please check that these are the right figures !!
Hope you get it all back together !
Mike
Beep ! Beep !
THANKS AGAIN speedicusmaximus
Mike, I can´t thank you enough, Iprinted everithing I needed , and already working on the engine, IT IS AN EXELENT 3K PAGES manual.
Thanks again.
Daniel
Thanks again.
Daniel
2003- 5.7 HEMY QUAD CAB
1973- xr7 COUGAR
1993-LS 400 LEXUS
1973- xr7 COUGAR
1993-LS 400 LEXUS
-
- Posts: 143
- Joined: Thu May 18, 2006 11:31 am
- Location: UK
Hi Daniel,
I'm glad you got everything you needed for the rebuild - let us know when you fire the truck up !
Seriously, glad to be of help
Perhaps anyone needing a manual should take a look at the www.hemitruckclub.com 'pages for their needs......
Mike
I'm glad you got everything you needed for the rebuild - let us know when you fire the truck up !
Seriously, glad to be of help
Perhaps anyone needing a manual should take a look at the www.hemitruckclub.com 'pages for their needs......
Mike
Beep ! Beep !