CYLINDER HEAD TORQUE

castierr · Post by **castierr** » Fri May 19, 2006 9:11 am

Hello everyone, IÂ´m overhauling my 2003 5.7 Hemi, in Central America, Need to know the torque on cylinder heads,and others, does anyone have that info. Or need to get a manual just for that, and if so, can some help how to go about finding the manual?
Many Thanks

Daniel Diday
Honduras c.a

castierr · Post by **castierr** » Mon May 22, 2006 4:51 pm

Please, I have the engine apart ,just waiting for the torque pressure to the cylinder heads, has anyone como across these information?
Daniel

speedicusmaximus · Post by **speedicusmaximus** » Tue May 23, 2006 6:26 am

Hi,
I searched for these figures on the 'net. The best I could get, was at a 'site named, www.hemitruckclub.com. From the home page, go through to their link for the '03 manual, engines, 5.7L, cylinder heads, and then cylinder head installation.
It might be a little slow to load if you're on a low performance system - it's all pdf's. So bare with it !
Please check that these are the right figures !!
Hope you get it all back together !
Mike

castierr · Post by **castierr** » Tue May 23, 2006 3:00 pm

Thank you very much, IÂ´ll start geting the information a.s.a.p,
Thanks aga

in
Daniel

castierr · Post by **castierr** » Thu May 25, 2006 5:56 pm

Mike, I canÂ´t thank you enough, Iprinted everithing I needed , and already working on the engine, IT IS AN EXELENT 3K PAGES manual.
Thanks again.
Daniel

speedicusmaximus · Post by **speedicusmaximus** » Fri May 26, 2006 3:05 am

Hi Daniel,
I'm glad you got everything you needed for the rebuild - let us know when you fire the truck up !
Seriously, glad to be of help
Perhaps anyone needing a manual should take a look at the www.hemitruckclub.com 'pages for their needs......
Mike

TheHEMI.com

CYLINDER HEAD TORQUE

CYLINDER HEAD TORQUE

ANYONE?

Hemi Torque figures

Thank you

THANKS AGAIN speedicusmaximus