oil press. 03 ram

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
cuda614
Posts: 5
Joined: Tue Dec 05, 2006 9:27 pm
Location: columbus, ohio

oil press. 03 ram

Post by cuda614 »

hi guy's new to this forum long time mopar guy.
got a question, just bought an 03 dodge ram 5.7l hemi. when i start it up in the morning the oil pressure gauge does not read anything. but if i shut it off and start it right back up again it reads just fine. to me i think its just the sensor. but ive also heard that the oil pick up tube could be a problem. just wanted to know if anybody has any info. thanks.
5SpeedHemi
Posts: 45
Joined: Fri Oct 24, 2003 7:44 pm

Post by 5SpeedHemi »

My 03 was doing the same thing last month .now its normal, oil fill is good and the engine sounds good with no unusual noise and the temp is normal so I guess all is well, must have been just reading wrong ..I hope
03/ Silver 2500 QC/LB 4X4 Hemi 5 Speed Manual shift
Bailiesdad
Posts: 433
Joined: Sat Dec 01, 2001 6:00 pm
Location: Maryland

Post by Bailiesdad »

Check the sender switch on the block.
Post Reply