5.7 won't fire the injectors while cranking?

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
smackhonda
Posts: 2
Joined: Fri Jul 23, 2010 9:18 pm

5.7 won't fire the injectors while cranking?

Post by smackhonda »

I put a 5.7 hemi in my 68 dart and im having a problem. It will not fire the injectors while it cranks. If i give it a shot of ether it will pop right off and fire the injectors. THe injectors have power going to them, the computer just isnt grounding them out when they are suppose to fire. Is anyone familar with this problem or would have any clue on what would cause this? I thought it was in the ignition switch, not getting power to the computer but that is not the case. please help! thanks
392heminut
Posts: 488
Joined: Sat Nov 30, 2002 2:16 pm

Re: 5.7 won't fire the injectors while cranking?

Post by 392heminut »

Give the guys at Street & Performance a call (link below) they have quite a bit of experience with these swaps using the factory ECM.

http://www.hotrodlane.cc/
Owner of the Poor Man's Hemi Cuda
Post Reply