Disable TMR (Torque Mgmt Req)

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Locked
User avatar
scottm
Posts: 3121
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Disable TMR (Torque Mgmt Req)

Post by scottm » Tue Oct 14, 2003 7:56 pm

Here is what some people are doing to bypass the TMR:

Code: Select all

Remove the #7 pin from the bottom connector of the PCM.
(It will be a yellow cable with a dark green stripe.)
or

Code: Select all

Remove the #10 pin from the transmission side connector.
(The tranny connector should be right next to the PCM.)
People claim their 1-2 and 2-3 shifts are more firm now.
One guy says his 0-60 time has lost around 0.5 sec, too.
(Which was putting his RC Hemi Ram into the high 6s.)

The PCM is located on the passenger side of the engine bay.
I do not condone this mod, nor have I done it, but I am just
passing along the information that others are claiming works.

I am led to believe this mod only works on the 2003 models.
Something about the 2004s has changed to stop this upgrade.
Scott Moseman
http://www.TheHEMI.com/
Follow us: Image & Image

Locked