Does anyone have a chassis dyno run of the 5.7L HEMI to see how much power makes it to the rear wheels?
I have the data for an engine dyno run which did make the advertised 345 HP and 375 LB-FT, but want to know how much power is lost in the drivetrain.
(I will post the excel file of the engine dyno run if somone can explain how.)
5.7 HEMI Dyno Run
Moderator: scottm
-
- Posts: 18
- Joined: Sat Feb 14, 2004 7:28 am
- Location: WEST GEORGIA
It's tough to get a good dyno because of the 105mph speed limiter. That stops your pulls at about 4300rpms, 1500rpms less than redline. So the pulls in 3rd gear at 4300rpms have been between 240 and 260hp. Can't make judgement on that. People have been making 2nd gear pulls which aren't 1:1 but at least they can get to redline and that's been making 260 to 280hp. You can check out www.dodgetrucks.org and dodgetruckworld at http://dtw.truckmoxie.com to search for dyno's
1971 Plymouth Cuda - 451 stroker
2003 QC 4x4 Dodge Hemi - STS Turbo, KRC 6005 heads & rods, Ross pistons, 6.1L crank & cam, ARP main/head studs, JBA headers, SMT6, APS converter: 575rwtq/492rwhp @ 9psi
2005 Chrysler 300c
2003 QC 4x4 Dodge Hemi - STS Turbo, KRC 6005 heads & rods, Ross pistons, 6.1L crank & cam, ARP main/head studs, JBA headers, SMT6, APS converter: 575rwtq/492rwhp @ 9psi
2005 Chrysler 300c
Dyno Results
You can find Dyno results at airram.com. I also purchased the airram cold air injectection system from this guy, and I like it. Oversized K&N air filter, 4 inch insulated tubing. I have been getting about 1.5 more miles to the gallon. But anyway you can look up dyno results there.