Attn: 300C and Magnum RT Owners

Discussion of the 5.7L-6.1L-6.4L HEMIs.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3451
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Attn: 300C and Magnum RT Owners

Post by scottm »

Do not be afraid to sign-up on TheHemi.com Forums!
We have room for all Hemi owners, cars or trucks. :)

300C does 0-60 in 5.3 and 1/4 mi in 13.9 (from C&D).
This is from a 4000+ lb vehicle running on 2.82 gears!

When the next version release of phpBB comes out, it
should support sub-groups. So I can better itemize all
of the categories to break up the data a little bit better.
(Unless folks prefer we keep things more consolidated.)
5SpeedHemi
Posts: 45
Joined: Fri Oct 24, 2003 7:44 pm

Post by 5SpeedHemi »

I personally welcome all things Hemi..no racisism here its all about common interests. I'm a mopar motorhead from way back and embrace all things Hemi !!
Congrats Scott on a great site with no nasty people !!
03/ Silver 2500 QC/LB 4X4 Hemi 5 Speed Manual shift
MG42pillbox
Posts: 194
Joined: Mon Jul 14, 2003 7:29 pm
Location: Phoenix AZ

Post by MG42pillbox »

The #s are fantastic, the Magnum/300C Hemis achieve power at better RPM ranges than the Ram Hemis..... These engines should be implicated into the FS trucks.
One whose life is Infecting others with Falsehood, shall fall greater than any of their Victims.
Hemi300C
Posts: 1
Joined: Sun Jun 13, 2004 9:28 pm
Location: Indiana
Contact:

Post by Hemi300C »

Found you by accident, Thanks for the welcome!!!
Jeff
2002 Intrepid R/T Stone White
1 of 1917 Made!!!
2005 300C Cool Vanilla
Image

DaimlerChrysler Kokomo Transmission Plant 5305
InfoWar
Posts: 1
Joined: Wed Jun 23, 2004 7:53 pm

Just got my 300c

Post by InfoWar »

Well I just officially picked up my new 300c. It had to go back to the dealer 3 times and the paint shop 8 times to correct a paint problem.

Have to say I love it. A little slow off the line until the tranny figures out what to do. Seems to need a little refinement in the programming. Knowing me I will put add ons in when they start to roll around.
Angi300C
Posts: 1
Joined: Thu Jun 24, 2004 9:30 am
Location: Midwest (WI)
Contact:

300C

Post by Angi300C »

Great Site, very informative. I will visit often :lol: .
Angi
05' 300C Midnight Blue(ordered 5/3)
Patiently Waiting!:-)
barbnron
Posts: 2
Joined: Mon Jul 26, 2004 3:46 pm
Location: Smithville, Ohio

quarter mile time

Post by barbnron »

Ran my stock 300C yesterday, 14.20, 2.03 60 ft time. About 65 degrees. Will these things really run 13.8s? like Car and Driver said?
Satin Jade Pearl 300C
Post Reply