Where to Buy a Crate Hemi Engine

Discussion of Hemi crate engines.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 2847
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Where to Buy a Crate Hemi Engine

Post by scottm » Wed Feb 26, 2003 2:53 pm

So you want to purchase a crate Hemi engine?
Here are a few places that I suggest to check.

Hensley Performance (Knoxville, TN)
http://www.hensleyracing.net/

Mopar Engines West (Morgan Hill, CA)
http://www.moparengineswest.com/

Ray Barton (Robesonia, PA)
http://www.raybarton.com/

Scoggin Dickey (Lubbock, TX)
http://www.sdpc2000.com/

Be sure to tell them TheHemi.com sent you there!

cuda70
Posts: 13
Joined: Fri Jan 28, 2005 2:32 pm

Problems with crates

Post by cuda70 » Fri Jan 28, 2005 3:34 pm

Problems with crate’s is certainly not limited to Chryslers. My friends in the Chevy world are reporting the same thing with Chevy crates. The word is that "crate motors" (although are to spec) are not built with premium parts. I'm willing to bet any crate hemi does not come with a billet crank or even pistons from a reparable company like TRW.

EVERY engine builder I have talked with recommends buying a bare block and heads and build it yourself with race quality components. The cost is about the same but the engines strength is like night and day. There are many good designs that can be followed so all you really are doing is assembling.

I have been exploring crate engines for my Cuda. I have also heard the horror stories.

Just my opinion!

davesanrn
Posts: 1
Joined: Thu Jul 21, 2005 12:36 am
Location: Hawajah Iraq (Home is Hardin, Montana)

crate engine advice

Post by davesanrn » Fri Jul 22, 2005 1:31 am

part of the allure of the crate engine to me is to get the electronics, wiring harness, computer, etc to install in a non original type car. Do you recommend buying these elsewhere and building an engine myself. I've done a million engine swaps and built quite a few engines, but it is always the wiring that stops me. When I hear about guys buying wrecked dodge rams and swapping in the wiring harnesses, I am always a bit jealous because I don't even know where to start with something like that.

hemi4711
Posts: 22
Joined: Wed Apr 23, 2003 8:36 am

Crate Hemi

Post by hemi4711 » Fri Jul 22, 2005 7:36 am

I would recomend Indy Cylinder Head, they make their own blocks and heads. I bought my Hemi from them and the received it in about TWO weeks. Very happy with their service. I would not recomend RAY BARTON
poor quality (unless your a big bucks super stock racer) and you will wait for ever for a engine, like maybe a year or more. Get a custom built engine you will be way more HAPPY than the junk MOPAR crate engines with the exception of the 5.7 they seem to be ok. Just a truck hemi made to work in most any car or truck. Shop around, alot of money could be wasted on a problem engine.

User avatar
NZ440R/T
Posts: 9
Joined: Sun Apr 08, 2007 2:15 am
Location: New Zealand

Post by NZ440R/T » Sun Jul 29, 2007 11:46 am

:wink:


Tim Banning @ FHO
www.forhemisonly.com



8)

1badgtx
Posts: 1
Joined: Thu Jun 02, 2011 1:54 pm

Re: Where to Buy a Crate Hemi Engine

Post by 1badgtx » Fri Jun 03, 2011 9:54 am

Ray Barton, Ray Barton, Ray Barton!

http://www.youtube.com/watch?v=Jjr6Eac4 ... re=feedlik
You do not have the required permissions to view the files attached to this post.

Post Reply