Page 1 of 1
Posted: Wed Jul 24, 2002 1:13 pm
Anyone know of any "street trim" 528s out there? If so, how do they run? I'm nearly ready to install mine and I'm wondering what to expect.
Posted: Mon Jul 14, 2003 8:47 pm
I have heard #s from High 11s and as good as low 10s. The thing RUNS.
Re: 528 performance
Posted: Thu Jul 24, 2003 7:40 pm
ply426 wrote:Anyone know of any "street trim" 528s out there? If so, how do they run? I'm nearly ready to install mine and I'm wondering what to expect.
ON which vehicle?
The truck below has a crate 528 with 710HP (TB unit not carb).
Posted: Thu Jul 24, 2003 7:46 pm
People with B bodies.
need hemi trans for 4x4 jeep
Posted: Wed Jul 14, 2004 1:38 am
I have been tryin to find a trans for my 81 jeep wagoner and i am not havin any luck... The engine is going to be a 528 crate hemi but theres no transmission and transfer case to back it up
... I need some help..
Posted: Wed Jul 14, 2004 8:22 am
Get a bigblock 727 and a 727 out of a wagoneer I'm not sure when Wagoneers started useing them but I think it was 80. Take the jeep trans tailhousing and output shaft and rebuild the bigblock 727 with those parts. For the Tcase if you have the diff on the drivers side (which I think 81;s had) use a tcase out of a 94+ V8 truck (diesel and V10 has wrong spline count) or an Atlas II from advance adapters ($2k). Parts Milke (www.partsmike.com
) is a good source. With your engine the Atlas would make more sense.
cant use 727 engine
Posted: Wed Jul 14, 2004 11:34 pm
The only engine i can use is a hemi only and has to be a 528... I cant find any information to see if the 727 transmission will bolt up to the big hemi... any other info would be helpful..
Posted: Mon Jul 26, 2004 12:30 am