Alum EFI 572 HEMI 'Cuda Project

Discussion about the Hemi in general.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Alum EFI 572 HEMI 'Cuda Project

Post by scottm »

Bob Johnson's G Force Cuda
http://www.johnsonshotrodshop.com/g_force_cuda.htm
http://www.johnsonshotrodshop.com/absol ... egoryid=14

How about this? All aluminum EFI 572 HEMI under the hood. :o
johnny5
Posts: 128
Joined: Mon Dec 05, 2005 3:52 pm
Location: St Charles, MO

Post by johnny5 »

:o
Bailiesdad
Posts: 433
Joined: Sat Dec 01, 2001 6:00 pm
Location: Maryland

Post by Bailiesdad »

std trans, 8. sec 1/4s, street driven, AND Efi with engine over the rear axel......

http://hem.passagen.se/hemipanter/?k
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

I'll have to show Goran this, he has posted here....
I've never seen an "8 second 1/4 mile" claimed by Goran, in fact he says his car is not set up for drag racing.
It's an absolute incredible piece of engineering IMO. It's not a drag racer, it's a complete thoroughly thought out package that's meant to do all sorts of things well, but drag racing wasn't one of his goals I don't think....?


Goran?
Bailiesdad
Posts: 433
Joined: Sat Dec 01, 2001 6:00 pm
Location: Maryland

Post by Bailiesdad »

CrAzY MoPaR GuY wrote:I'll have to show Goran this, he has posted here....
I've never seen an "8 second 1/4 mile" claimed by Goran, in fact he says his car is not set up for drag racing.
It's an absolute incredible piece of engineering IMO. It's not a drag racer, it's a complete thoroughly thought out package that's meant to do all sorts of things well, but drag racing wasn't one of his goals I don't think....?


Goran?
Not one of the origional "goals" just the results when he finished...
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

Bailiesdad wrote:
CrAzY MoPaR GuY wrote:I'll have to show Goran this, he has posted here....
I've never seen an "8 second 1/4 mile" claimed by Goran, in fact he says his car is not set up for drag racing.
It's an absolute incredible piece of engineering IMO. It's not a drag racer, it's a complete thoroughly thought out package that's meant to do all sorts of things well, but drag racing wasn't one of his goals I don't think....?


Goran?
Not one of the origional "goals" just the results when he finished...
Has he told you he ran an "8 second 1/4 mile"? Or did Goran post that somewhere? I've never seen it.
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

I looked on his site again, and couldn't find anything about a track time for his Pantera. I see a time listed for his son's (I think it's his son's) P1800 Volvo. Are you possibly confusing the two cars somehow?
I wish I had a picture of the P1800 somewhere, it's GORGEOUS!
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

I attempted to email Goran, but it bounced back to me.
I would SO own a Pantera -- if I had the cash available!
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

scottm wrote:I attempted to email Goran, but it bounced back to me.
I would SO own a Pantera -- if I had the cash available!
It would take alot of cash I bet! LOL That's a heckuva car! I have yet to see an owner built car with suspension and a chassis that comes close to his labour intensive masterpiece.
Post Reply