Oilpan

Discussion about the Hemi in general.

Moderator: scottm

Post Reply
Goran
Posts: 25
Joined: Thu Jan 17, 2008 2:01 am
Contact:

Oilpan

Post by Goran »

Hi!
I have made a new oil pan again. I wanted some more space to the sides, for the oil to be thrown out, so I made ​​a tray
that just fit between the frame legs on the car. The old pan has worked fine, but it was small because of the space for
the parking brake, etc, and a pan of this construction brings with it a lot more work to produce. I'm ashamed to admit that
"too much work" is a valid argument for doing something easier. :-?
Image
This requires longer bolts.
Image
The oil pickup.
Image
Image
Image
And at last, on the car.
Image
This oilpan 8 liters. I've driven 2000 miles with it and the oilpressure is surprisingly little better, or rather more stable,
presumably due to less air whipped into the oil as it can be thrown further out to the side of the crank. It also goes a
bit colder due to the larger cooling area under the car.
I am a 69 years old sportscar freak living in Sweden with a Hemi equipped Pantera.
DavidBraley
Posts: 163
Joined: Sat Jan 30, 2010 7:40 pm
Location: Fort Collins, Colorado

Re: Oilpan

Post by DavidBraley »

Beautiful work!
Horsepower determines how fast you hit the wall. Torque determines the size of the hole you make. Holzwarth's Law
mart
Posts: 536
Joined: Tue Mar 22, 2005 2:06 pm

Re: Oilpan

Post by mart »

Very slick! Well done!
- mart
Post Reply