Hemi Ram Timeslips

How fast does your Hemi run?
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Hemi Ram Timeslips

Post by scottm »

All you Hemi Ram owners, what are your times?
I know a bunch of you must have tried 'em out!

The best that I have heard from friends has been
a 14.72 @ 98 from a Ram 1500 w/ 3.92 rear cogs.
Short bed and I am assuming a regular cab truck.
hemi4711
Posts: 22
Joined: Wed Apr 23, 2003 8:36 am

Post by hemi4711 »

That info you have is correct. And yes my truck is a standard cab. Those
times I ran are on a STOCK truck. I am going to install a cold air intake
and run it again. I will post the new times.
epg3
Posts: 8
Joined: Fri Apr 04, 2003 8:05 pm

Post by epg3 »

I have a QUADCAB 1500, 3.92:1 gears, 5.7L HEMI, 275/55R20 tires (31" tall) best time = 15.47 @ 82 MPH

I have 4.56:1 gears on the way........
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

Yeah, I have been reading 15.3s to 15.4s for QCs.
That is still pretty quick for such a heavy truck! :)
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

2003 Ram 1500 Hemi RC with 3.92 gears
14.80 @ 91 mph with a 2.09 60-foot time
(This beast weighed 4850# w/ the driver)
epg3
Posts: 8
Joined: Fri Apr 04, 2003 8:05 pm

4.56:1 Richmond gears!

Post by epg3 »

Got them in the truck today! The truck feels more ALIVE......

Things to know:
Vehicle speed is obtained from wheel speed, NOT transmission output shaft speed. No modification needed for your speedometer!

The carrier pinion shaft needs to be modified for ring gear clearance to install it.

3.91:1 - 31 in tire @ 70 mph = 2000 rpm aprox.

4.56:1 - 31 in tire @ 70 mph = 2400 rpm aprox.

Can't wait to get to the track!

-Eddie
tirpitz

Post by tirpitz »

Let us know how the gears work out at the track.

BTW, does the trans shift on an input from engine RPM, or based on speedometer like the GM OBDI PCM?
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

I'm surprised how fast these new Hemi trucks are. They seem to be on par with an R/T Dakota, or..? Pretty impressive!
epg3
Posts: 8
Joined: Fri Apr 04, 2003 8:05 pm

OOOPS I forgot!

Post by epg3 »

When I went to the track, and ran a 14.72....... The best time out of the chevy trucks was a 16.52! hehehe!

Remember......

MOPAR or NO CAR!

-Eddie
epg3
Posts: 8
Joined: Fri Apr 04, 2003 8:05 pm

OOOPS!!!!

Post by epg3 »

15.47 not 14.72 :D
AcadianHemi
Posts: 2
Joined: Thu Jun 12, 2003 10:13 am
Location: Ottawa, Ontario, Canada

Post by AcadianHemi »

As per Truck Trend Magazine, a 1500 Hemi 2wd with 20"wheels and 3.92 gets 15.12@89.06.
2003 Qc 4WD Black sport Hemi, 20"wheels and 3.92
Hemidakota
Posts: 149
Joined: Thu Jul 17, 2003 9:31 am
Location: Oceanside

Re: 4.56:1 Richmond gears!

Post by Hemidakota »

epg3 wrote:Got them in the truck today! The truck feels more ALIVE......

Things to know:
Vehicle speed is obtained from wheel speed, NOT transmission output shaft speed. No modification needed for your speedometer!

The carrier pinion shaft needs to be modified for ring gear clearance to install it.

3.91:1 - 31 in tire @ 70 mph = 2000 rpm aprox.

4.56:1 - 31 in tire @ 70 mph = 2400 rpm aprox.

Can't wait to get to the track!

-Eddie
I can see someone doing a rear squat on launching soon... :o
Steve
Future Purchase: 2006 Charger SRT-8/2006 MegaCab 6.1 Hemi
Image
"Coming soon 600HP SRT-10 to pull the SRT-4 & SRT-8 Charger to the track!"
hemi777

03 hemi SLT longbed runs 14.02 at 95mph no juice

Post by hemi777 »

my 03 hemi slt longbed ran 14.02 at 95mph with no juice and its 97% stock...it has a homemade intake and a flowmaster muffler and some free mods.....my times are very well documented over at www.dtw.truckmoxie.com... and there is a video and time slips and several dtw members that seen the run ....i have a total $19.275 invested in my truck.....1/8 mile it ran 8.876 at 77.53mph....my 60ft was 2.01 with the stock tires and wheels soon it will be in the 13ssssss read more about it at dtw in the hemi forum
Asa

Post by Asa »

Man thats fast, just got my 4.56 gears in and will be taking it to the track in April! :wink:
Asa

Post by Asa »

just ran 14.748 at 92 mph seems like it should be faster :(
GreenbeanZ28
Posts: 22
Joined: Wed Apr 28, 2004 2:59 pm

Post by GreenbeanZ28 »

60 foot---2.17
330 ft----6.285
1/8th ET-9.696
MPH........72.82
1/4 ET.....15.163
MPH.........87.20

Truck in sig.....I guess the '04's are slower???
Russ
'96 Z28 M6-Stock rear springs and shocks
11.41@119 423/375 rwhp/rwtq
'04 Ram 1500 SLT 2WD
Mac CAI, Flowmaster Side exit exhaust.
RumbleBee
Posts: 11
Joined: Sun Jun 06, 2004 10:38 am
Location: Dallas, TX - San Antonio, TX

Get Serious

Post by RumbleBee »

This is absolutely hilarious what people will try to pull out there A## on a forum.....A 13 with a longbed factory hemi.....oh wait ...mufflers...:) Come on now you have got to be joking if you think a 5000 lb longbed with under 300 rear wheel hp is going to run a 13 .... or even a low 14.... I have a best time of 14.2 with my Rumble bee with well over $3,000 in mods....and well under 4,300 pounds stripped down and empty....The quad cabs are also running a true 15.9-16.5 at the track depending on conditions.... I have seen it for my own eyes....If anyone would like a copy of this time slip email me.....For everyone else go tell your lies to someone who doesn't own a hemi. LOL
04 RumbleBee 2/4 Drop, 22" Motto Wheels, 305/40/22 Toyo Proxes, 360airintakez powder coated yellow 4" intake, JetStage2 chip, Dynatech LongTube Headers, No Cats, 3" exhaust, Cust. Leath. seats w/ RumbleBee Symbols,5 spd w/ 3.92's KenneBell 06/30/2004
Rampant
Posts: 94
Joined: Fri Jun 25, 2004 8:38 pm
Location: Virginia

Post by Rampant »

Rumblebee, you might have a timeslip, but if you go over to dtw you can actually see the 12.75 run of Hemi777. The only lol thing is that you wasted so much money on mods with no results. If you do not believe his times go watch the video, because you obviously do not know what people are running in their trucks. And there are also quad cabs running in the 13's.
hemifred
Posts: 38
Joined: Sat Sep 08, 2001 7:00 pm
Contact:

Post by hemifred »

MY SOX& MARTIN DUSTER 572 9.01 AT 153.50

NEXT WEEK SHOULD SEE SOME 8.70'S
HOME OF THE
"ORIGINAL SOX & MARTIN HEMI DUSTER"
AND
"WORLD'S QUICKEST AND FASTEST ROAD RUNNER"
7.21 @ 193 mph
VISIT MY SITE PROSTOCKHEMI.COM
Rampant
Posts: 94
Joined: Fri Jun 25, 2004 8:38 pm
Location: Virginia

Post by Rampant »

...The quad cabs are also running a true 15.9-16.5 at the track depending on conditions.... I have seen it for my own eyes.
My 2004 quad runs 15.375 first time I took it out with 87F and 81% humidity. That is without my tailgate but with the spare 20 still there. The rumble bee I ran with was 15.5.
hemiracer22
Posts: 2
Joined: Sat Sep 25, 2004 9:52 pm
Location: san antonio, tx

how

Post by hemiracer22 »

how did you run a 14.72 stock rc. I have an 03 ram hemi rc and best time is 15.28. I have tried many varitions on many runs and this is with flowmasters and k&n.
03 ram hemi SC, flowmaster, k&N
Fepony
Posts: 7
Joined: Sun May 01, 2005 11:22 am
Location: Panama City area
Contact:

Post by Fepony »

I just thought i'd drop in on your forum and see what all the fuss is about. I own a 2002 Harley Davidson F150. I'm NOT here to flame your trucks! I just wanted to compare my performance to yours. It appears there is NO comparison. :roll: My truck weighs in at 5600#. Here is the slip #'s from my last trip to the dragstrip. I made 13 passes and they were all within .202 of each other. All on pump gas and street tires.

RT .325

60' 1.983

330' 5.687

1/8th ET 8.74

1/8 mph 80.51

I usually run at Breakaway in PC, Fl. or Dothan dragway in Cottonwood, Ala. Anyone here want to race? Just PM me and i'll meet you at either strip. My truck IS NOT all modded up. I have K&N, small pulley and tune. Anyone that don't believe me, come on down! I love the taste of Hemi's. :D (they taste like chicken)....hehehe (wink)
2002 HD F150, 406rwhp 505rwtq, Tuned by Torrie. New best on street tires.
8.3@85 1/8th 13.01 1/4
SublimeGTX

Post by SublimeGTX »

My best time so far is:
14.025 @ 102.67mph in the 1/4.

That's at 110 degree's outside & with:

Airaid CAI
Dual (cats back) w/Flowmaster 40 Series
& Manual Dumps
Hypertech ll Power Programmer
Motive 4.56's
NX Express Nitrous

I'm anxious to get back this winter!


8)
hemidup
Posts: 88
Joined: Fri Sep 29, 2006 9:47 am

Post by hemidup »

We took my supercharged "Judy Lilly Rumble Bee" to Monster Mopar Weekend. 12.65 @ 105.22. 5275lbs with street tires. Judy ran my truck during the exhibition events. It was 21 years since Miss Mighty Mopar herself, seen her last time slip. Judy and Arlen Vanke were pretty impressed with the performance of the new generation Hemi's.
392 Blown Hemi
SublimeGTX

Post by SublimeGTX »

[quote="hemidup"]We took my supercharged "Judy Lilly Rumble Bee" to Monster Mopar Weekend. 12.65 @ 105.22. 5275lbs with street tires. Judy ran my truck during the exhibition events. It was 21 years since Miss Mighty Mopar herself, seen her last time slip. Judy and Arlen Vanke were pretty impressed with the performance of the new generation Hemi's.[/quote]

:o Wow! I'm working on getting into the 13's! Nice numbers! :D
Post Reply