Hemi Ram Timeslips
Hemi Ram Timeslips
All you Hemi Ram owners, what are your times?
I know a bunch of you must have tried 'em out!
The best that I have heard from friends has been
a 14.72 @ 98 from a Ram 1500 w/ 3.92 rear cogs.
Short bed and I am assuming a regular cab truck.
I know a bunch of you must have tried 'em out!
The best that I have heard from friends has been
a 14.72 @ 98 from a Ram 1500 w/ 3.92 rear cogs.
Short bed and I am assuming a regular cab truck.
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
Yeah, I have been reading 15.3s to 15.4s for QCs.
That is still pretty quick for such a heavy truck!
That is still pretty quick for such a heavy truck!
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
2003 Ram 1500 Hemi RC with 3.92 gears
14.80 @ 91 mph with a 2.09 60-foot time
(This beast weighed 4850# w/ the driver)
14.80 @ 91 mph with a 2.09 60-foot time
(This beast weighed 4850# w/ the driver)
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
4.56:1 Richmond gears!
Got them in the truck today! The truck feels more ALIVE......
Things to know:
Vehicle speed is obtained from wheel speed, NOT transmission output shaft speed. No modification needed for your speedometer!
The carrier pinion shaft needs to be modified for ring gear clearance to install it.
3.91:1 - 31 in tire @ 70 mph = 2000 rpm aprox.
4.56:1 - 31 in tire @ 70 mph = 2400 rpm aprox.
Can't wait to get to the track!
-Eddie
Things to know:
Vehicle speed is obtained from wheel speed, NOT transmission output shaft speed. No modification needed for your speedometer!
The carrier pinion shaft needs to be modified for ring gear clearance to install it.
3.91:1 - 31 in tire @ 70 mph = 2000 rpm aprox.
4.56:1 - 31 in tire @ 70 mph = 2400 rpm aprox.
Can't wait to get to the track!
-Eddie
-
- Posts: 71
- Joined: Fri Oct 11, 2002 5:25 pm
OOOPS I forgot!
When I went to the track, and ran a 14.72....... The best time out of the chevy trucks was a 16.52! hehehe!
Remember......
MOPAR or NO CAR!
-Eddie
Remember......
MOPAR or NO CAR!
-Eddie
-
- Posts: 2
- Joined: Thu Jun 12, 2003 10:13 am
- Location: Ottawa, Ontario, Canada
-
- Posts: 149
- Joined: Thu Jul 17, 2003 9:31 am
- Location: Oceanside
Re: 4.56:1 Richmond gears!
I can see someone doing a rear squat on launching soon...epg3 wrote:Got them in the truck today! The truck feels more ALIVE......
Things to know:
Vehicle speed is obtained from wheel speed, NOT transmission output shaft speed. No modification needed for your speedometer!
The carrier pinion shaft needs to be modified for ring gear clearance to install it.
3.91:1 - 31 in tire @ 70 mph = 2000 rpm aprox.
4.56:1 - 31 in tire @ 70 mph = 2400 rpm aprox.
Can't wait to get to the track!
-Eddie
Steve
Future Purchase: 2006 Charger SRT-8/2006 MegaCab 6.1 Hemi
"Coming soon 600HP SRT-10 to pull the SRT-4 & SRT-8 Charger to the track!"
Future Purchase: 2006 Charger SRT-8/2006 MegaCab 6.1 Hemi
"Coming soon 600HP SRT-10 to pull the SRT-4 & SRT-8 Charger to the track!"
03 hemi SLT longbed runs 14.02 at 95mph no juice
my 03 hemi slt longbed ran 14.02 at 95mph with no juice and its 97% stock...it has a homemade intake and a flowmaster muffler and some free mods.....my times are very well documented over at www.dtw.truckmoxie.com... and there is a video and time slips and several dtw members that seen the run ....i have a total $19.275 invested in my truck.....1/8 mile it ran 8.876 at 77.53mph....my 60ft was 2.01 with the stock tires and wheels soon it will be in the 13ssssss read more about it at dtw in the hemi forum
-
- Posts: 22
- Joined: Wed Apr 28, 2004 2:59 pm
Get Serious
This is absolutely hilarious what people will try to pull out there A## on a forum.....A 13 with a longbed factory hemi.....oh wait ...mufflers... Come on now you have got to be joking if you think a 5000 lb longbed with under 300 rear wheel hp is going to run a 13 .... or even a low 14.... I have a best time of 14.2 with my Rumble bee with well over $3,000 in mods....and well under 4,300 pounds stripped down and empty....The quad cabs are also running a true 15.9-16.5 at the track depending on conditions.... I have seen it for my own eyes....If anyone would like a copy of this time slip email me.....For everyone else go tell your lies to someone who doesn't own a hemi. LOL
04 RumbleBee 2/4 Drop, 22" Motto Wheels, 305/40/22 Toyo Proxes, 360airintakez powder coated yellow 4" intake, JetStage2 chip, Dynatech LongTube Headers, No Cats, 3" exhaust, Cust. Leath. seats w/ RumbleBee Symbols,5 spd w/ 3.92's KenneBell 06/30/2004
Rumblebee, you might have a timeslip, but if you go over to dtw you can actually see the 12.75 run of Hemi777. The only lol thing is that you wasted so much money on mods with no results. If you do not believe his times go watch the video, because you obviously do not know what people are running in their trucks. And there are also quad cabs running in the 13's.
-
- Posts: 2
- Joined: Sat Sep 25, 2004 9:52 pm
- Location: san antonio, tx
how
how did you run a 14.72 stock rc. I have an 03 ram hemi rc and best time is 15.28. I have tried many varitions on many runs and this is with flowmasters and k&n.
03 ram hemi SC, flowmaster, k&N
I just thought i'd drop in on your forum and see what all the fuss is about. I own a 2002 Harley Davidson F150. I'm NOT here to flame your trucks! I just wanted to compare my performance to yours. It appears there is NO comparison. My truck weighs in at 5600#. Here is the slip #'s from my last trip to the dragstrip. I made 13 passes and they were all within .202 of each other. All on pump gas and street tires.
RT .325
60' 1.983
330' 5.687
1/8th ET 8.74
1/8 mph 80.51
I usually run at Breakaway in PC, Fl. or Dothan dragway in Cottonwood, Ala. Anyone here want to race? Just PM me and i'll meet you at either strip. My truck IS NOT all modded up. I have K&N, small pulley and tune. Anyone that don't believe me, come on down! I love the taste of Hemi's. (they taste like chicken)....hehehe (wink)
RT .325
60' 1.983
330' 5.687
1/8th ET 8.74
1/8 mph 80.51
I usually run at Breakaway in PC, Fl. or Dothan dragway in Cottonwood, Ala. Anyone here want to race? Just PM me and i'll meet you at either strip. My truck IS NOT all modded up. I have K&N, small pulley and tune. Anyone that don't believe me, come on down! I love the taste of Hemi's. (they taste like chicken)....hehehe (wink)
2002 HD F150, 406rwhp 505rwtq, Tuned by Torrie. New best on street tires.
8.3@85 1/8th 13.01 1/4
8.3@85 1/8th 13.01 1/4
We took my supercharged "Judy Lilly Rumble Bee" to Monster Mopar Weekend. 12.65 @ 105.22. 5275lbs with street tires. Judy ran my truck during the exhibition events. It was 21 years since Miss Mighty Mopar herself, seen her last time slip. Judy and Arlen Vanke were pretty impressed with the performance of the new generation Hemi's.
392 Blown Hemi
[quote="hemidup"]We took my supercharged "Judy Lilly Rumble Bee" to Monster Mopar Weekend. 12.65 @ 105.22. 5275lbs with street tires. Judy ran my truck during the exhibition events. It was 21 years since Miss Mighty Mopar herself, seen her last time slip. Judy and Arlen Vanke were pretty impressed with the performance of the new generation Hemi's.[/quote]
Wow! I'm working on getting into the 13's! Nice numbers!
Wow! I'm working on getting into the 13's! Nice numbers!