Info on Hemi Colt

Discuss the good old days of Hemi racing.
P9x25
Posts: 4
Joined: Tue Aug 24, 2004 8:28 pm

Info on Hemi Colt

Postby P9x25 » Wed Aug 25, 2004 10:40 pm

Can anyone give some good information about this Colt ?? Thanks

Stewart

http://prostockhemi.com/hemipro/47.jpg

john
Posts: 49
Joined: Sat May 04, 2002 9:00 pm
Location: phoenix az

Postby john » Mon Nov 27, 2006 3:52 pm

I saw the car years ago at Englishtown. This was during the closing days of Mopar's involvment with P/S so they really weren't used much. The car, as I recall was built by S&M & Don hardy Racecars in Texas. They had the usual P/S tricks done to them but oddly enough a fairly stock front-end. When I saw the car it had twin plug heads. This was all around the time Mopar was playing with the D-3 & D-5 heads so I imagine it was equipped with them at some point. NHRA limited the engine size on these things (match races were a whole other story) so they ran either 396 or 366 cu. ins. (just de-stroked 426s,really) They weren't all that successful in P/S and often ran in Comp Elim. as Altereds.


Return to “Nostalgia Factory Experimental”

Who is online

Users browsing this forum: No registered users and 1 guest