pistons

Discussion of the 331-354-392 HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
jerm
Posts: 5
Joined: Fri Aug 06, 2004 11:33 am

pistons

Post by jerm »

hey guys(and gals)just found out about this site and was wandering if anyone can help me,,,I need to know the max overbore and deck height for a52 331 ,,,,also if anyone knows the compression height of the pistons it would save me some math.thanks in advance.
Moparlee
Posts: 144
Joined: Thu Jul 22, 2004 6:38 am
Location: Carthage, MO

Post by Moparlee »

I've heard that people have bored them to the 354 bore size and not having a problem. I quess the best thing to do is have the block sonic tested. On the deck height all I know it's the same as the 354, that probably dosen't help you none. Sorry. In my area there isn't anybody close that can even do the sonic testing. Good luck on you project.

Lee
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
Post Reply