Early Hemi Pictures
Moderators: scottm, TrWaters, 392heminut
Early Hemi Pictures
Where's all the Early Hemi Pictures at? Anybody have any pictures they would like to share? Is there away that you can attache pictures in this forum? Thanks everybody?
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
- centerline
- Posts: 89
- Joined: Fri Oct 04, 2002 10:48 am
- Contact:
Here's a pic of the '54 331 thats in my '53 Chevy pickup. It's a bit of a tight fit but it certainly does fill out the engine compartment.
Will be starting it for the first time in a couple weeks, once the wiring is completed.
Will be starting it for the first time in a couple weeks, once the wiring is completed.
Centerline
http://www.hotrodsandhemis.com
http://www.hotrodsandhemis.com
- centerline
- Posts: 89
- Joined: Fri Oct 04, 2002 10:48 am
- Contact:
Yes they are posted on a couple web sites and the post just links to them.Moparlee wrote:Awesome, cool thanks. How are you doing it? Do you got have them on a website or? Thanks again.
Centerline
http://www.hotrodsandhemis.com
http://www.hotrodsandhemis.com
-
- Posts: 172
- Joined: Wed Jan 15, 2003 8:07 pm
- Location: Windsor, Ontario, Canada
- Contact:
well i have alot of pics they are not pics of my own but of many that i have seen this past summer and many other pictures
mostly located on my website
www.geocities.com/dodgedifferent2/indexall.html
mostly located on my website
www.geocities.com/dodgedifferent2/indexall.html
Centerline
If I'm not mistaken I think that I've been to your website. It looks like gain some more ground from the pictures I seen on the website. Did you have the motor build up of that motor on that website? If so what's the web address of it. Thanks.
Lee
Lee
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
- centerline
- Posts: 89
- Joined: Fri Oct 04, 2002 10:48 am
- Contact:
Here's a 1951 Hudson Hornet that we pulled from a junkyard. It has a 291 hemi in it. I just tossed on a smaller dominator carb that I had laying around after I cleaned up the intake manifold and then tossed on a set of ignition wires that I had from one of our drag engines. It fired up the first time around and moves around a little but definitely needs gone through soon.