Valve cover studs/bolts leak?
Moderators: scottm, TrWaters, 392heminut
Valve cover studs/bolts leak?
Valve cover studs/bolts. I've noticed that they could leak water, at least on the intake side. Has anybody had problems with this? Do you have to use some kind of sealer around the bolts or studs which ever you decided to use? This is on 392 heads. I havn't noticed on the others to know if they are like that or not. Thanks for your time?
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
leaks
My 330 desoto valve cover bolt/stud holes are drilled into the water jacket. I just used some sealer on the threads when the engine was assembled. Never checked my 392, however sealant was used there also! Hope this helps
41 Chevy with blown 330 Desoto / 32 Ford coupe with blown 392 Chrysler