How much lift or spring pressure will a stock rocker arms take/handle? Anybody no? Thanks.
Lee
Stock rocker arms?
Moderators: scottm, TrWaters, 392heminut
Stock rocker arms?
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
-
- Posts: 46
- Joined: Mon Jan 24, 2005 10:49 am
- Location: Roseburg, OR
Stock Rocker Arms
Call Rocker Arm Specialties 1-800-747-2767
Ask for Gary Patrick or e-mail to rocker@czone.net
He also does a trick mod to Hemi Rockers.
Don
Ask for Gary Patrick or e-mail to rocker@czone.net
He also does a trick mod to Hemi Rockers.
Don
55 Red Ram Powered 30 A Roadster
Thanks, sorry it took so long to get back. Ya, I heard or read somewhere that the stock rockers wouldn't take much more over .500 lift. Is there people here that are running more than this with a stock rocker? Thanks for your time.
Lee
Lee
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
-
- Posts: 46
- Joined: Mon Jan 24, 2005 10:49 am
- Location: Roseburg, OR
Stock Rocker Arms
I think you are right on that .500 lift, but Gary Patrick can give you the straight skinny.
Don
Don
55 Red Ram Powered 30 A Roadster
Really I would think that really comes down to the spring pressure. I would think that it would be cool to run a new Comp cams F.R.L. cams. Which would have serious spring pressures. Cause even if I was run a small one, say under .500 lift it would still need a serious set of springs. Like my newest cam in my 346. It has 368 pounds open with 125 at the seat. The 368 is a lot for a flat tappet hydrualic. What do you guys think on this. Will a stock rocker take that kind of open pressure?
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant