Page 1 of 1

HEMI HEAD BOLT SEQUENCE.

Posted: Tue Dec 03, 2002 4:21 pm
by DAVE94LIGHTNING
Guys: What is the loosening and tightening sequence on the 354 head bolts?

Thanks in advance.:)

Posted: Tue Dec 03, 2002 9:06 pm
by scottm
Assuming you are looking at the heads with the intake
valves at the top, exhaust at the bottom, here should
be a good pattern to follow:

8 4 2 6 10
7 3 1 5 9

Go 60-80 ft-lbs on the first sweep and 85 ft-lbs next.
Basically just work the bolts from the inside going out.