Blown Street 392 Cam Specs Post Yours

cylontymany · Post by **cylontymany** » Sun Mar 12, 2006 11:42 am

I am trying to decide what cam to go with using a hydraulic cam. So please let me know what you did and why you chose that combo. Thanxs

krooser · Post by **krooser** » Sun May 21, 2006 9:35 pm

cylontymany wrote:I am trying to decide what cam to go with using a hydraulic cam. So please let me know what you did and why you chose that combo. Thanxs

450 lift....280 duration @.050 lift...110 degree centers..installed 4 degrees advanced...all of this per George @ Clay Smith Cams, Buena Park, CA.

He's been doing cams for a looooong time and I took his advice.

Bailiesdad · Post by **Bailiesdad** » Mon May 22, 2006 8:03 am

Never assembled a blower motor with a hyd cam, lots of mech, many more full roller.

krooser · Post by **krooser** » Mon May 22, 2006 1:15 pm

Bailiesdad wrote:Never assembled a blower motor with a hyd cam, lots of mech, many more full roller.

I did the hyd. for obvious reasons....EZ maintenence...I used stock pushrods since this is never gonna see high RPM (as long as I'm driving)....and I wanted to save my adjustable rockers for my next project.

TheHEMI.com

Blown Street 392 Cam Specs Post Yours

Blown Street 392 Cam Specs Post Yours

Re: Blown Street 392 Cam Specs Post Yours