Blown Street 392 Cam Specs Post Yours
Moderators: scottm, TrWaters, 392heminut
-
- Posts: 21
- Joined: Fri Jul 23, 2004 11:35 pm
Blown Street 392 Cam Specs Post Yours
I am trying to decide what cam to go with using a hydraulic cam. So please let me know what you did and why you chose that combo. Thanxs
Re: Blown Street 392 Cam Specs Post Yours
450 lift....280 duration @.050 lift...110 degree centers..installed 4 degrees advanced...all of this per George @ Clay Smith Cams, Buena Park, CA.cylontymany wrote:I am trying to decide what cam to go with using a hydraulic cam. So please let me know what you did and why you chose that combo. Thanxs
He's been doing cams for a looooong time and I took his advice.
China...Great Food...Crappy Tools
-
- Posts: 433
- Joined: Sat Dec 01, 2001 6:00 pm
- Location: Maryland
I did the hyd. for obvious reasons....EZ maintenence...I used stock pushrods since this is never gonna see high RPM (as long as I'm driving)....and I wanted to save my adjustable rockers for my next project.Bailiesdad wrote:Never assembled a blower motor with a hyd cam, lots of mech, many more full roller.
China...Great Food...Crappy Tools