LOOKING FOR 392 CENTER SUMP OIL PAN

Discussion of the 331-354-392 HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
65Valiant
Posts: 21
Joined: Wed Oct 27, 2004 3:43 pm
Location: ILLINOIS

LOOKING FOR 392 CENTER SUMP OIL PAN

Post by 65Valiant »

HEY THERE,
I AM LOOKING TO PURCHASE A 392 CENTER SUMP OIL PAN FOR MY '65 VALIANT WITH A '56 354 HEMI. I HAVE ONE ON THERE NOW BUT I WOULD LIKE TO MAKE A BAFFLE FOR ONE, SO IF ANYBODY CAN HELP ME OUT LET ME KNOW.
THANKS BRIAN AND GORDY
Moparlee
Posts: 144
Joined: Thu Jul 22, 2004 6:38 am
Location: Carthage, MO

Post by Moparlee »

I used to have one, but traded for a rear sump so that I could put in a truck. Man I bet that car is awesome to drive. Part of me is thinking about someday putting my 392 in my 64 Valiant with an alterkation front K-member hooked to my four speed and 4.10's out back. Getting those aluminum heads from Hot Heads and have them cnc'd. Definitly a real cool factor going on with that. Have you raced your car yet?

Lee
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
65Valiant
Posts: 21
Joined: Wed Oct 27, 2004 3:43 pm
Location: ILLINOIS

Post by 65Valiant »

Hey there,
Here is a link to a pic of the 354 HEMI Valiant at the Belvidere Mopar Happening car show. And no I have not raced it yet, sorry. The old Hemi has 80,000 original miles and all we did was clean it up and paint it, she needs a rebuild but for cruising around its been alot of fun.
Brian and Gordy
http://www.chicagolandmopar.com/images/ ... _6371.html
Moparlee
Posts: 144
Joined: Thu Jul 22, 2004 6:38 am
Location: Carthage, MO

Post by Moparlee »

Killer, not I got three pictures of it.

Lee
392 Hemi
354 cracked and needs a sleeve
241 or 270 the only running one I have
340/E-brock heads/six-pack/4-speed/mini tubed/spool-64 Valiant
jim d
Posts: 12
Joined: Tue Nov 23, 2004 8:04 pm

Post by jim d »

i have a392 center sump bottom has been stightened "not a real good job but the flanges are good. you can e/mail me @jrdumont@fuse.net or call 513 761 9593
JIM
Post Reply