wanted-354 hemi/poly used pistons/rings/bearings, etc

Discussion of the 331-354-392 HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
oldngood
Posts: 121
Joined: Thu Mar 13, 2008 5:14 pm

wanted-354 hemi/poly used pistons/rings/bearings, etc

Post by oldngood »

I'm doing a Chrysler early hemi experiment and need some low-cost used parts:

354 hemi/poly pistons and rings, std. or oversize
331/354 bearings
would also consider 331/392 pistons/rings/bearings, tell me what you have

often times these parts are still useable when an engine it torn down, if you have a box or bucket full of old hemi parts, email me with your list, perhaps I'd buy them- if you have only a few pistons, etc. that's ok too

also a pair of Firepower valvecovers, any condition- or even trucki/industrial covers would do, dented/rusted ok but not rotted through or crushed
David Hunt
Posts: 5
Joined: Sat Oct 25, 2008 8:21 am

Re: wanted-354 hemi/poly used pistons/rings/bearings, etc

Post by David Hunt »

Good day, I have a Solid set of FirePower valve covers that are Silver painted. I have one complete set of POLY V-8 pistons with caps / nuts/bearings..{they need to be replaced}/ rings on the pistons. set of push rods and matching rocker assemblies. these are used but good. contact me at DvH903@Aol.com. have a Mopar Day David Hunt
mopar2ya
Posts: 1
Joined: Tue Dec 01, 2009 6:15 pm

Re: wanted-354 hemi/poly used pistons/rings/bearings, etc

Post by mopar2ya »

I have a used 354 hemi short block: one hemi head. On Vancouver Island. Open to offers. We all know how hard it is to find something like this so no insults please.jwilliams@pacificcoast.net
Post Reply