I don't get asked all the time, but I do get asked.
So for all you Aussies, here's an additional forum!
I'm curious on some good sources of info on those
6-cyl Australian Hemis? Let's see some links...
Good source for Australian 6-cyl Hemi info?
Moderator: scottm
Here's some engine info, can anyone fill in the blanks?
215
140 @ 4400
200 @ 1800
1-bbl carb
8.0:1 C/R
3.52" bore
3.68" stroke
245
?
?
2-bbl carb
7.6:1 C/R
3.76" bore
3.68" stroke
245
?
?
2-bbl carb
9.0:1 C/R
3.76" bore
3.68" stroke
245
?
?
2-bbl carb
?
3.76" bore
3.68" stroke
245
185 @ 4600
240 @ 2000
2-bbl carb
9.5:1 C/R
3.76" bore
3.68" stroke
250 "E31"
195 @ 4600
245 @ 2800
2-bbl carb
9.8:1 C/R
3.8" bore
3.68" stroke
250 "E34"
235 @ 4800
265 @ 3000
9.8:1 C/R
4-bbl carb (AFB)
3.8" bore
3.68" stroke
265
146 @ 4800
212 @ 3000
2-bbl carb
9.1:1 C/R
3.91" bore
3.68" stroke
265
203 @ 4600
262 @ 2000
2-bbl carb
9.5:1 C/R
3.91" bore
3.68" stroke
265
218 @ 4800
273 @ 3000
2-bbl carb
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E37"
248 @ 4800
306 @ 3400
(3) 2-bbl carb (Webber)
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E38"
280 @ 5000
318 @ 3700
(3) 2-bbl carb (Webber)
10.0:1 C/R
3.91" bore
3.68" stroke
265 "E48"
248 @ 5000
280 @ 3200
(3) 2-bbl carb (Webber)
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E49"
302 @ 5600
320 @ 4100
(3) 2-bbl carb (Webber)
10.0:1 C/R
3.91" bore
3.68" stroke
I can't promise that I'm not missing anything, however.
So please update me if you think there's anything more.
215
140 @ 4400
200 @ 1800
1-bbl carb
8.0:1 C/R
3.52" bore
3.68" stroke
245
?
?
2-bbl carb
7.6:1 C/R
3.76" bore
3.68" stroke
245
?
?
2-bbl carb
9.0:1 C/R
3.76" bore
3.68" stroke
245
?
?
2-bbl carb
?
3.76" bore
3.68" stroke
245
185 @ 4600
240 @ 2000
2-bbl carb
9.5:1 C/R
3.76" bore
3.68" stroke
250 "E31"
195 @ 4600
245 @ 2800
2-bbl carb
9.8:1 C/R
3.8" bore
3.68" stroke
250 "E34"
235 @ 4800
265 @ 3000
9.8:1 C/R
4-bbl carb (AFB)
3.8" bore
3.68" stroke
265
146 @ 4800
212 @ 3000
2-bbl carb
9.1:1 C/R
3.91" bore
3.68" stroke
265
203 @ 4600
262 @ 2000
2-bbl carb
9.5:1 C/R
3.91" bore
3.68" stroke
265
218 @ 4800
273 @ 3000
2-bbl carb
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E37"
248 @ 4800
306 @ 3400
(3) 2-bbl carb (Webber)
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E38"
280 @ 5000
318 @ 3700
(3) 2-bbl carb (Webber)
10.0:1 C/R
3.91" bore
3.68" stroke
265 "E48"
248 @ 5000
280 @ 3200
(3) 2-bbl carb (Webber)
9.7:1 C/R
3.91" bore
3.68" stroke
265 "E49"
302 @ 5600
320 @ 4100
(3) 2-bbl carb (Webber)
10.0:1 C/R
3.91" bore
3.68" stroke
I can't promise that I'm not missing anything, however.
So please update me if you think there's anything more.
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
Aussy site for the Hemi 6
This site has a lot of good info on the Hemi 6, it may help some of you out.
http://moparmarketforum.com/phpBB/
Are there many, if any of these engines in the states?
Jess
http://moparmarketforum.com/phpBB/
Are there many, if any of these engines in the states?
Jess
Re: Aussy site for the Hemi 6
When I first joined the local Mopar Club years ago there was a member with a Valiant Charger w the Hemi 6 in it. He moved out of the area shortly after that. Only saw it once. One was listed for sale in L.A. a while back on Moparmarket.LUCKY-13 wrote:This site has a lot of good info on the Hemi 6, it may help some of you out.
http://moparmarketforum.com/phpBB/
Are there many, if any of these engines in the states?
Jess
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
Re: Good source for Australian 6-cyl Hemi info?
I've brought a bunch of them over here to the US, along with a bunch of the Aussie Valiants too I've got a couple sitting in the garage still actually (265's) along with bunches of parts. Just holler if you'd like to see any sort of pictures of them, etc!
Re: Good source for Australian 6-cyl Hemi info?
--------------------------------OzHemi wrote:I've brought a bunch of them over here to the US, along with a bunch of the Aussie Valiants too I've got a couple sitting in the garage still actually (265's) along with bunches of parts. Just holler if you'd like to see any sort of pictures of them, etc!
Holler "Pics please!"
mart
===================================
Re: Good source for Australian 6-cyl Hemi info?
Hmmmmm....let's see...
First off, my old Charger.. (I've had a few, but this was the first one I bought and imported)
This had an factory valve cover and factory intake as well (non correct 45DCOE's though)
Couple of old pics of the 265 I had built for the Charger..You can see it is really more of a poly design than a true Hemi with the plugs off to the side..
And couple other just 'take out' type condition ones...
And one with air conditioning on it (somewhat rare)
And a ported head I have laying around still...
Any other pics you'd like ? (Got a few of the engines in the garage still...)
First off, my old Charger.. (I've had a few, but this was the first one I bought and imported)
This had an factory valve cover and factory intake as well (non correct 45DCOE's though)
Couple of old pics of the 265 I had built for the Charger..You can see it is really more of a poly design than a true Hemi with the plugs off to the side..
And couple other just 'take out' type condition ones...
And one with air conditioning on it (somewhat rare)
And a ported head I have laying around still...
Any other pics you'd like ? (Got a few of the engines in the garage still...)