DLI Mopar Performance roller rocker arms

Discussion of the 426 Street / Strip HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
Bailiesdad
Posts: 433
Joined: Sat Dec 01, 2001 6:00 pm
Location: Maryland

DLI Mopar Performance roller rocker arms

Post by Bailiesdad »

For you guys using the DLI rocker arms check to make sure they are the latest full oiling versions.
The intakes have oiling holes next to the arm itself and by the pushrod portion part of the arms.
Seems some of the earlier production arms did not have the oiling hole to squirt oil onto the springs. Just measure where the hole is drilled on the later production arms, mark the older arms, and drill the older versions to convert.
Post Reply