Finally got my engine!!!!!!!

Discussion of the 426 Street / Strip HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Finally got my engine!!!!!!!

Post by CrAzY MoPaR GuY »

Well, I'm hoping the wait was worth it.
Image[/img]
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Post by scottm »

So... are you going to provide more info? :)
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

LOL!
Whaddya wanna know?
It's a stroker- Barton built, it has a very mild hydraulic cam, Accel sequential DFI, it pulled just under 600 horsepower with only 32 degrees of timing and almost no tuning and it's going to get the living *you know what* beaten out of it once it's up and running!
It's going into a Pro Street 1940 Plymouth Businessman's Coupe.
http://www.crazymoparguy.homestead.com/ ... coupe.html
Image
MG42pillbox
Posts: 194
Joined: Mon Jul 14, 2003 7:29 pm
Location: Phoenix AZ

Post by MG42pillbox »

That thing is gorgious, Good work man and good Luck
One whose life is Infecting others with Falsehood, shall fall greater than any of their Victims.
HemiDevil
Posts: 1
Joined: Mon Apr 19, 2004 4:59 am

Post by HemiDevil »

Can you provide more specs about the motor? As in CID and such. You said its a stroker so Im assuming its a 472. What mods have you done or plan to do on that beaut'?
hemidan
Posts: 17
Joined: Sun Nov 10, 2002 1:57 pm
Location: Sweden
Contact:

Post by hemidan »

:D Pls Dave Hensley !

Post more pics of that car ,,,,,
And The Hemi .......... Looks awful lots of Power,,,,,,,,

Hemidan / :roll:
raxen
Posts: 9
Joined: Tue Sep 21, 2004 11:11 pm
Location: Rolla, MO

Post by raxen »

Lookin' good.
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

Well, I've been working on it, I'm just mocking up the cooling system.
MP aluminum waterpump housing, Edelbrock water pump, Northern 31"X19" aluminum "dual pass" radiator and a Flexalite 295 fan kit, supposedly 4600 cfm.
Is this thing gonna stay cool?!?!
Image
charlie1
Posts: 1
Joined: Thu Feb 10, 2005 10:19 pm

Post by charlie1 »

CrazyMoparGuy
Where did you get those sparkplug wires from??
They look like they may be Taylors wires?
Were they made to custom length or off the shelf?

I love how they look and how you have routed the wires

Thanks
Charlie1
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

They are MSD 8.5 spiral core leads, they are a custom length kit, I took 8mm wire separators and drilled them out to accept the 8.5mm wires.

Thanks Charlie1!
CrAzY MoPaR GuY
Posts: 71
Joined: Fri Oct 11, 2002 5:25 pm

Post by CrAzY MoPaR GuY »

Radiator goes in tomorrow! Maybe even the steering linkage. Getting closer....
Image
Post Reply