Ok
I have tried to dig up some info about this manifold, its the newer design with the removable tops. I would like to now the power band this manifold would have on a 572 inch Hemi (4.5 bore X 4.5 stroke).
New World siamese Block
Engine in question has stock OOTB MP/Edelbrock Hemi heads, that will have some upgrades before I put them in service. New springs, retainers, locks etc. Anyways engine will have 12 1/4:1 -12.5:1 compression, probably looking into two Vacuum carbs 750-850 cfm range. Headers will be TTI's 2 1/4 for a 65 B body. I have a couple diff cams but this is the one I am going to run. I ordered this cam from Ray Barton, said it was a awsome cam in the larger CID engine...He said it would pull vacuum for Power brakes too LOL.
Bullet Racing Solid Flat tappet with a set of Howards Direct Lube EDM lifters
283/283 @50
109 LSA and installed at 105-106 ICL
lift with 1.57 intake is .667
lift with 1.55 exh is a little less like .646
I have a set of DLI/Mopar Roller tipped Rockers, stands, the whole setup, does anyone know for sure what the rocker ratio these actually measure mocked up?
I just want to order the correct springs and valve train componets. If this thing will want to turn more than 7K I need to take a diff route on a few things. Also has anyone done any dynoing of pushrods on these engines? They are so Long, I thought about going with some good ones, i been looking at the Manton Tapered peices, big as I can go maybe 7/16??
Repop Cross Ram on "Big" motors?
Discussion of the 426 Street / Strip HEMIs.
Moderators: scottm, TrWaters, 392heminut
-
- Posts: 1
- Joined: Fri Nov 21, 2008 8:48 pm
Return to “(LEGACY) 426 Street / Strip HEMIs”
Jump to
- Announcements
- ↳ TheHemi.com Updates
- ↳ Mopar Events
- ↳ Mopar News
- 1st Gen HEMI (241-392 "Early HEMI")
- ↳ How-Tos, Tips and Tricks
- ↳ Projects and Products
- ↳ (LEGACY) 331-354-392 HEMIs
- ↳ (LEGACY) Early Dodge / DeSoto HEMIs
- 2nd Gen HEMI (426 "Elephant HEMI")
- ↳ How-Tos, Tips and Tricks
- ↳ Projects and Products
- ↳ (LEGACY) 426 Street / Strip HEMIs
- ↳ Registry Entries
- 3rd Gen HEMI (5.7L-6.4L "New HEMI")
- ↳ How-Tos, Tips and Tricks
- ↳ Projects and Products
- ↳ (LEGACY) New 5.7L-6.1L-6.4L HEMIs
- General Discussion
- ↳ General Hemi Discussion
- ↳ HEMIs in our Garages
- ↳ Decode My Hemi
- ↳ Marine / Industrial Hemis
- ↳ Australian 6-cyl Hemis
- ↳ "Nearly Hemi" Polys
- ↳ Prototype Hemi Engines
- ↳ Crate Hemi Engines
- Racing Action
- ↳ Current Hemi Racing
- ↳ Nostalgia Hemi Racing
- ↳ Nostalgia Super Stock
- ↳ Nostalgia Road Racing
- ↳ Nostalgia Factory Experimental
- ↳ Hemi Timeslips
- Trading Floor
- ↳ HEMI Items Forsale
- ↳ HEMI Items Wanted
- ↳ General Mopar Items Forsale
- ↳ General Mopar Items Wanted
- ↳ Group Purchases
- Sponsors
- ↳ Announcements
- ↳ RockAuto.com
- ↳ Hot Heads
- ↳ TR Waters Early Hemi Parts
- ↳ The Auto Review
- Extra Curricular
- ↳ Automotive (Not HEMI)
- ↳ Off-Topic
- ↳ Politics