found set of D6 heads

Discussion of the 426 Street / Strip HEMIs.

Moderators: TrWaters, 392heminut, scottm

Post Reply
Txhemi
Posts: 1
Joined: Mon Mar 15, 2010 12:40 pm

found set of D6 heads

Post by Txhemi » Mon Mar 15, 2010 2:55 pm

Recently found a set of aluminum D6 heads, cast #3614485. Appear to be in good condition, do not have rocker assemblies with them. They were found with more Hemi parts including a block, cranks, rods, intakes, carbs, etc.

I do not have any Hemi knowledge to speak of. Are these heads worth anything to a collector/restorer?

Any help would be appreciated.

Thanks!

hemifred
Posts: 39
Joined: Sat Sep 08, 2001 7:00 pm
Contact:

Re: found set of D6 heads

Post by hemifred » Mon Mar 15, 2010 11:51 pm

PN3614487 released late 1974 early 1975
Chrysler upgraded the D-1 series to these.An entirely different exhaust flange and D shaped port are used. Conventional headers will not fit. primary use was in blown motors. Not the most popular head due to port sizes and lack of manifolds. here's one behund the fabled D-5 Weslake round port hemi head that saw very little use.Image

Post Reply