Page 1 of 1
Newbie
Posted: Wed Feb 09, 2011 2:18 pm
by zigs
I'm new to this site . I have a little old with the and a little older. I'm building a 68 Dart with a 354 Hemi. I was reading a thread a couple days ago about a 392 swap so I thought i would share. is it practical...... no strictly show and go.
Dart001.jpg
Re: Newbie
Posted: Mon Feb 14, 2011 5:03 pm
by mart
The 354 will be *marginally* easier to do
and a better fit in an A-body than the 392.
The 331-354's have a lower deck height
and thus are just a bit narrower and about
40 to 50 lbs. lighter. It's definitely not a
"bolt in" deal and will take some serious
work, and fabrication skills - but it's
do-able. Good luck and have fun!
mart
================================
Re: Newbie
Posted: Tue Feb 15, 2011 12:29 am
by zigs
mart wrote:The 354 will be *marginally* easier to do
and a better fit in an A-body than the 392.
The 331-354's have a lower deck height
and thus are just a bit narrower and about
40 to 50 lbs. lighter. It's definitely not a
"bolt in" deal and will take some serious
work, and fabrication skills - but it's
do-able. Good luck and have fun!
mart
================================
Thanks .I've had the engine in for a year.