Hot Heads Aluminum Head CNC Offering

1st Gen HEMI projects and products.

Moderator: scottm

Post Reply
BOSSMAN
Posts: 11
Joined: Mon Jun 09, 2014 8:10 pm
Location: Fort Calhoun, Nebraska
Contact:

Hot Heads Aluminum Head CNC Offering

Post by BOSSMAN »

After all of the development that went into our Engine Masters effort I decided to give some CNC offerings for Bob Walker's Hot Heads casting. As of now there are two programs available.

Street Port: Uses 2.065/1.800 (standard Hot Heads valves) with the optional 2.125 valve for more flow. This head is meant for street rods or guys seeking more performance out of their as cast heads. The nice thing about this program is it doesn't require pushrod sleeves and works with most setups out there. With a 2.065 valve the head flows 350cfm!
Image

Image

Image


Race Port: Uses 2.200/1.800 valves and can be custom tailored to specific needs. This head is capable of flowing 420cfm! Please contact for more info.
Image

Image

Exhaust Port for both Programs. Works with Hot Heads header flanges.
Image

All of these pictures are from my R&D process and the programs are currently finished. Will have more pictures of the finished product here soon but if this interests anybody please feel free to contact me for more info and pricing.
Nick Smithberg
www.smithbergracing.com
Cylinder Heads & Manifolds
(402) 616-7643
BOSSMAN
Posts: 11
Joined: Mon Jun 09, 2014 8:10 pm
Location: Fort Calhoun, Nebraska
Contact:

Re: Hot Heads Aluminum Head CNC Offering

Post by BOSSMAN »

A little video of the head in the CNC machine.

http://youtu.be/eKscJZubGHw
Nick Smithberg
www.smithbergracing.com
Cylinder Heads & Manifolds
(402) 616-7643
Post Reply