Hot Heads Aluminum Head CNC Offering
Posted: Mon Jun 09, 2014 10:41 pm
After all of the development that went into our Engine Masters effort I decided to give some CNC offerings for Bob Walker's Hot Heads casting. As of now there are two programs available.
Street Port: Uses 2.065/1.800 (standard Hot Heads valves) with the optional 2.125 valve for more flow. This head is meant for street rods or guys seeking more performance out of their as cast heads. The nice thing about this program is it doesn't require pushrod sleeves and works with most setups out there. With a 2.065 valve the head flows 350cfm!
Race Port: Uses 2.200/1.800 valves and can be custom tailored to specific needs. This head is capable of flowing 420cfm! Please contact for more info.
Exhaust Port for both Programs. Works with Hot Heads header flanges.
All of these pictures are from my R&D process and the programs are currently finished. Will have more pictures of the finished product here soon but if this interests anybody please feel free to contact me for more info and pricing.
Street Port: Uses 2.065/1.800 (standard Hot Heads valves) with the optional 2.125 valve for more flow. This head is meant for street rods or guys seeking more performance out of their as cast heads. The nice thing about this program is it doesn't require pushrod sleeves and works with most setups out there. With a 2.065 valve the head flows 350cfm!
Race Port: Uses 2.200/1.800 valves and can be custom tailored to specific needs. This head is capable of flowing 420cfm! Please contact for more info.
Exhaust Port for both Programs. Works with Hot Heads header flanges.
All of these pictures are from my R&D process and the programs are currently finished. Will have more pictures of the finished product here soon but if this interests anybody please feel free to contact me for more info and pricing.