desoto 330 heads on a 291 engine

[chopped and channeled]

Is this apossible combination has anyone done this and what does this entail any help would be appreciated thanx Scott

[41hemi]

Yes, this has been done. A friend of mine did this and the only thing he needed to do was use custom length push rods. He used a log manifold with rubber hoses connecting the 2 logs so I cannot say if there was a need for intake spacers or not. Let me know if that measurement is needed ; I will look at his car and measure it.

[George]

Low deck blocks use low deck intakes & high block use high intakes regardless of heads. You'll need a low block intake, or a log type that can compensate for the difference.