DeSoto 341 to Toploader

Discussion of the Early Dodge / DeSoto HEMIs.

Moderators: scottm, TrWaters, 392heminut

Post Reply
ward3162
Posts: 8
Joined: Fri Jan 05, 2007 9:53 am

DeSoto 341 to Toploader

Post by ward3162 »

Has anyone out there done this setup? I'm using a Chry 360 Lakewood bellhousing...it's amost an exact match to the 341 block. Need info on crank,flywheel,pilot bearing,hydraulic throw out bearing interface. Suggestions on parts greatly appreciated. Cost is a consideration. Thanks.
George
Posts: 694
Joined: Wed Aug 25, 2004 4:12 pm
Location: Fl

Post by George »

The tail end of Hemis are the same. Look at adaptors/info for the Chr. Hemis.
Post Reply