plug wires for stock insulators

Discussion of the Early Dodge / DeSoto HEMIs.

Moderators: TrWaters, 392heminut, scottm

Post Reply
Spoons
Posts: 6
Joined: Tue Jul 01, 2008 5:18 pm

plug wires for stock insulators

Post by Spoons » Sat Feb 28, 2009 6:24 pm

Where do you find the snap on type ends for the 7mm wires. I have a nice set from NAPA, but they won't snap on the plug with the little clip on it. If I take it off, then it goes on the spark plug(Very loosely) end but doesn't snap on. I'm running no covers but have the 426 boots. My buddie said just cover them with the insulator and they wont come loose cause the boot cover will hold them on the plug. I pulled a wire off the 354 sitting in the corner, slid it on the insulator and it snaps right on....
You do not have the required permissions to view the files attached to this post.

charlie
Posts: 9
Joined: Fri Aug 28, 2009 7:48 am

Re: plug wires for stock insulators

Post by charlie » Sat Aug 29, 2009 2:43 pm

you can get a new set of insulators from MOPAR PERFORMANCE

MOPAR CHARLIE

Post Reply