6-Pack Intake for 291 DeSoto?

Discussion of the Early Dodge / DeSoto HEMIs.

Moderators: TrWaters, 392heminut, scottm

Post Reply
User avatar
scottm
Posts: 3120
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

6-Pack Intake for 291 DeSoto?

Post by scottm » Wed Jun 02, 2004 3:37 pm

I have someone asking me if there's an intake
for an S22 (291 DeSoto) to mount a 6-pack of
Stromberg 94 carbs? Would this intake exist?
Scott Moseman
http://www.TheHEMI.com/
Follow us: Image & Image

41hemi
Posts: 78
Joined: Thu Jul 17, 2003 7:35 pm
Location: Elkridge, Maryland

Intake

Post by 41hemi » Thu Jun 03, 2004 3:31 pm

There is an intake on ebay for the low deck DeSotos that carries 4 carbs..... can't say I've ever seen a tri power though someone may have produced one (weiand, edmunds, offy, edlebrock?)

retro

Post by retro » Sun Apr 02, 2006 12:51 am

This is my first post on here but i found this to be interesting. I work for a company called EELCo who is making this manifold now and is showing it for the first time next week.

George
Posts: 646
Joined: Wed Aug 25, 2004 4:12 pm
Location: Fl

Post by George » Sun Apr 02, 2006 9:57 am

Hot Heads has twin log 6X2 intakes.

rlwalker
Posts: 9
Joined: Sat May 22, 2004 1:28 pm
Location: Lowgap, NC
Contact:

Post by rlwalker » Sun Apr 02, 2006 10:44 am

Scott:
In addition to the 6x2 log manifold, Hot Heads can get a fabricated 3x2 or 4x2 or even an 8x2 log manifold.

desotoman
Posts: 54
Joined: Sun Jul 17, 2005 1:02 pm

Post by desotoman » Sun Apr 02, 2006 11:09 pm

Weiand made a 6 two barrel manifold that would fit both the low and high deck desoto motors. They are around, but honestly they are no good for the street in my opinion. They were made exactly like a crower ufab but in aluminum. The two pieces connected together with heater hose, and that is why you could use them on any desoto motor.

GeminiEFI
Posts: 4
Joined: Tue Apr 18, 2006 5:50 pm
Location: Defiance Mo.

291 6 pack

Post by GeminiEFI » Tue Apr 18, 2006 6:00 pm

We make a six or eight pack EFI using REAL Stromberg's as throttle bodies for all Chrysler Corp. early hemi's. WE also make an 8 stack injection for all Chrysler Corp. early hemi's,
GeminiEFI

Post Reply