Kinsler 426 HEMI Fuel Injection Manifold

2nd Gen HEMI projects and products.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3442
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Kinsler 426 HEMI Fuel Injection Manifold

Post by scottm »

Image
Available with a throttle size just right for street performance and drivability, the Kinsler 426 HEMI individual runner manifold provides awesome throttle response and compliments all cylinder heads as each runner of the manifold has the same shape to flow air equally. The adjustable runner length allows tuning the induction system to move the horsepower peak RPM to achieve the engine’s maximum output potential.

Since there is one nozzle in each runner, the fuel distribution is exactly the same to each cylinder of the engine. The manifold is specifically designed to accept EFI Injectors that are located inboard and include a special inboard idle air control log system. The throttle shafts are plated and run in bronze bushings for super smooth operation. Available throttle bore sizes: 2.0” up to 2 5/8”

The three-piece manifold design will accommodate custom deck heights and custom ports. For more information, call (248) 362-1145 or visit www.kinsler.com.

* Provides better throttle response
* Compliments all cylinder heads and deck heights
* Plated throttle shafts with bronze bushings
* Bore sizes from 2-2 5/8”

Contact Information:

Kinsler
Web: http://www.kinsler.com
Phone: 248-362-1145
Post Reply