1970 'Cuda 426 HEMI

2nd Gen HEMI projects and products.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 2834
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

1970 'Cuda 426 HEMI

Post by scottm » Fri Feb 17, 2012 8:08 pm

Image

1970 Plymouth Cuda - Exclusive Photos!
http://www.moparmusclemagazine.com/feat ... index.html
Fast Facts
'70 Cuda Convertible
John Lanza, Harwood, Maryland

Mopar Power

Engine: From the factory, this drop-top was equipped with a 383. Now however, the area under the hood is filled with a 426 Hemi that has been fitted with an LA Bullet, Steel crankshaft connected to stock Hemi connecting rods. Compressing the air fuel mix is a set of Keith Black pistons. A conservative Racer Brown camshaft with .500-inch lift, and 238-degrees of duration at .050-inch lift work the valves in the aluminum Mopar heads. Squirting fuel into the Mopar intake is a pair of Edelbrock 600 cfm carburetors.
Transmission: Originally a manually-shifted car, upgrading to a five-speed was a logical choice.
Rear: It's a basic Dana 60 with 4.10 gears. The five-speed makes the 4.10's a great choice for cruising, and makes the car a blast to drive.

Sure Grip

Suspension: The front is now supported by an Alter-k-tion tubular k-frame with QA1 adjustable coil overs.
Brakes: Bringing the E-Body to a screeching halt is a set of four Wilwood disc brakes.
Wheels/Tires: A set of American Racing polished Torque Thrusts measuring 18 x 10-inch on the rear with 6-1/2-inches back spacing, and 18 x 8-inch on the front with 5-inches of back spacing. For tires, Nitto NT 555's, 285/40-18 and 245/45-18 round out the rollers.

High Impact


Paint/Body: Since John paints cars for a living, covering the car in a new shade of Sublime was no problem.
Interior: John used parts from Legendary Auto Interiors to restore the cockpit himself.
I love 1970 HemiCudas!

Post Reply