Edelbrock's E-Force Boosts New HEMI Horsepower

3rd Gen HEMI projects and products.

Moderator: scottm

Post Reply
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Edelbrock's E-Force Boosts New HEMI Horsepower

Post by scottm »

Image

Edelbrock's E-Force Boosts New HEMI Horsepower
http://www.streetlegaltv.com/features/s ... orsepower/
Bringing back the legendary HEMI was a no-brainer for Chrysler. But what the new third generation HEMI lacked in brutish power, the latest in technology and engine management made it a great platform for the whole of the Chrysler line. Unfortunately, success breeds competition, and today, the HEMI’s got lots of it.

That’s why Edelbrock’s new E-Force superchargers are such a boon for the new elephant. Available for both the 5.7 and the 6.1, the E-Force blower works for any Mopar equipped with the late-model plants. Specifically designed to be a clean, stealthy addition to your Mopar, the E-Force increases performance like you’d expect from a supercharger but quietly, and with minimum increased engine compartment temperature.

With 7-inch intake runners, the E-Force supercharger provides plenty of low-end torque as well as top-end horsepower. And equal to any of Edelbrock’s E-Force packages, the HEMI E-Force comes with everything needed to install the supercharger, including injectors, fuel rails, and a tuner. Oh yeah, and it’s 50-state legal.

Additionally, for those racing their HEMI-equipped muscle machines, there is an optional E-Force Competition Kit which comes with just the bare essentials, just the stuff you’ll need to be first at the track!

* Comprehensive E-Force kit has everything needed to boost your HEMI
* Available for 5.7 and 6.1L applications
* Available in Street and Competition Kits
* Made in the USA
* Minimal air restriction, plenty of low-end torque, and quiet operation
speedicusmaximus
Posts: 143
Joined: Thu May 18, 2006 11:31 am
Location: UK

Re: Edelbrock's E-Force Boosts New HEMI Horsepower

Post by speedicusmaximus »

Anyone got any HP figures for this kit - based on an otherwise stock engine ?

And, does it fit the Ram Hemi ?

Mike
Beep ! Beep !
User avatar
scottm
Posts: 3443
Joined: Wed Aug 29, 2001 7:00 pm
Location: Texas
Contact:

Re: Edelbrock's E-Force Boosts New HEMI Horsepower

Post by scottm »

speedicusmaximus wrote:Anyone got any HP figures for this kit - based on an otherwise stock engine ?

And, does it fit the Ram Hemi ?
Hey Mike,

They're still in the "calibration phase" getting everything dialed in.
So it's not officially ready for market just yet. They're going to be
releasing models and specifics as they get packages ready to sell.
Post Reply