Guys: What is the loosening and tightening sequence on the 354 head bolts?
Thanks in advance.
HEMI HEAD BOLT SEQUENCE.
Moderators: scottm, TrWaters, 392heminut
-
- Posts: 3
- Joined: Tue Dec 03, 2002 4:18 pm
HEMI HEAD BOLT SEQUENCE.
331 HEMI IN A FLATBOTTOM HONDO V-DRIVE.
Assuming you are looking at the heads with the intake
valves at the top, exhaust at the bottom, here should
be a good pattern to follow:
8 4 2 6 10
7 3 1 5 9
Go 60-80 ft-lbs on the first sweep and 85 ft-lbs next.
Basically just work the bolts from the inside going out.
valves at the top, exhaust at the bottom, here should
be a good pattern to follow:
8 4 2 6 10
7 3 1 5 9
Go 60-80 ft-lbs on the first sweep and 85 ft-lbs next.
Basically just work the bolts from the inside going out.
Scott Moseman
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us:
http://www.TheHEMI.com/
http://www.MoparEVs.com/
http://www.MyAutoMaintenance.com/
Follow Us: